MC35XS3500PNA Freescale Semiconductor, MC35XS3500PNA Datasheet - Page 30

• Manufacturer Part Number: MC35XS3500PNA
• Description: IC SWITCH HIGHSIDE 24PQFN
• Manufacturer: Freescale Semiconductor
• Type: High Side Switchr

Specifications of MC35XS3500PNA

• Number Of Outputs: 5
• Rds (on): *
• Internal Switch(s): Yes
• Current Limit: 9A
• Voltage - Input: 7 V ~ 20 V
• Operating Temperature: -40°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 24-PQFN, 24-PowerQFN
• Product: MOSFET Gate Drivers
• Rise Time: 50 ns
• Fall Time: 50 ns
• Propagation Delay Time: 6.5 ms
• Supply Voltage (max): + 5.5 V
• Supply Voltage (min): - 0.3 V
• Supply Current: 20 mA
• Maximum Operating Temperature: + 125
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

30
35XS350
FUNCTIONAL DEVICE OPERATION
LOGIC COMMANDS AND REGISTERS
• if the device was in Fail mode, the failure is locked until
For OCHI2 and OCLO:
• if the device was in Normal mode: the output
• if the device was in Fail mode, Autorestart is activated.
The SPI fault reports are removed after a read operation:
Application of complete OCHI window depends on
toggling or not toggling D7 bit.
restart of the device: wake-up from Sleep mode or
V
corresponding register (bit D7) must be rewritten D7=1.
Application of complete OCHI window depends on
toggling or not toggling D7 bit.
The device Autorestart feature provides a fixed duty
cycle and fixed period with OCHI1 window.
Autorestart feature resets OCHI2 or OCLO fault after
corresponding Autorestart period.
BATPOR1
.
Over-voltage detection and active clamp
order to limit the maximum drain to source voltage.
(OUT[1 to 5]) is turned off which leads to a high voltage at
V
voltage is limited at V
through the load. In case of open load condition, the positive
transient pulses (ISO 7637 pulse 2 and inductive battery line)
shall be handled by the application.
Normal mode and Fail mode.
BAT
- OC bit=(OCHI1) or (OCHI2) fault
- OVL bit=(OCHI1) or (OCHI2) or (OCLO) fault
The 35XS3500 provides an active gate clamp circuit, in
In case of overload on an output, the corresponding switch
Figures 13
, with an inductive V
and
14
BATCLAMP
describe the faults management in
Analog Integrated Circuit Device Data
BAT
line. The maximum VBAT
by active clamp circuitry
Freescale Semiconductor