EELXT360PE.A2-868068 Cortina Systems Inc, EELXT360PE.A2-868068 Datasheet - Page 21

• Manufacturer Part Number: EELXT360PE.A2-868068
• Manufacturer: Cortina Systems Inc

Specifications of EELXT360PE.A2-868068

• Number Of Transceivers: 1
• Operating Supply Voltage (typ): 5V
• Screening Level: Industrial
• Mounting: Surface Mount
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Lead Free Status / RoHS Status: Compliant

LXT360 Transceiver
Datasheet: Long Form
249231, Revision 2.1
24 January 2008
2.7.1
2.7.1.1
Figure 5
Cortina Systems
Loopback Modes
Local Loopback (LLOOP)
See
inputs (TCLK and TPOS/TNEG or TDATA) loop back through the jitter attenuator (if enabled)
and appear at RCLK and RPOS/RNEG or RDATA. Note that during LLOOP , the JASEL input
is strictly an enable/disable control, i.e. it does not affect the placement of the JA. If the JA is
enabled, it is active in the loopback circuit. If the JA is bypassed, it is not active in the
loopback circuit.
The transmitter circuits are unaffected by LLOOP and the LXT360 Transceiver continues to
transmit the TPOS/TNEG or TDATA inputs (or a stream of 1’s if TAOS is asserted). When
used in this mode, the transceiver can function as a stand-alone jitter attenuator.
In Hardware mode, Local loopback (LLOOP) is selected by setting LLOOP High; in Host
mode, by setting bit CR2.ELLOOP = 1.
TAOS with LLOOP
®
LXT360 Integrated T1/E1 LH/SH Transceiver for DS1/DSX-1 or PRI Applications
Figure 5
and
Figure
6. LLOOP inhibits the receiver circuits. The transmit clock and data
TM
TM
2.7 Diagnostic Mode Operation
Page 21