TMPM380FYDFG Toshiba, TMPM380FYDFG Datasheet - Page 253

• Manufacturer Part Number: TMPM380FYDFG
• Manufacturer: Toshiba

Specifications of TMPM380FYDFG

• Product Summaries: Summary
• Lead Free: Yes
• Rohs Compatible Product(s): Available
• Rom (kbytes): 256K
• Rom Type: Flash
• Ram (kbytes): 16K
• Number Of Pins: 100
• Package: QFP(14×20)
• Vcc: 5V
• Cpu Mhz: 40
• Ssp (ch) Spi: 2
• I2c/sio (ch): 2
• Uart/sio (ch): 5
• Usb: -
• Can: -
• Ethernet: -
• External Bus Interface: N
• Cs/wait Controller (ch): -
• Dma Controller: 2
• 10-bit Da Converter: -
• 10-bit Ad Converter: -
• 12-bit Ad Converter: 18
• 16-bit Timer / Counter: 8
• Motor / Igbt Control: Y
• Real Time Clock: 1
• Watchdog Timer: Y
• Osc Freq Detect: Y
• Clock Gear: Y
• Low-power Hold Function: -
• Remote Control Interface: Y
• Hardware Cec Controller: -
• Comparators: -
• Low-voltage Detector: Y
• Etm Hardware Trace: 2-bit

10.6.15 One-time / continuous output mode
10.6.15.1
10.6.15.2
specifies the continuous output mode. In this mode, the timer continuously outputs specified
waveforms.
specifies the one-time output mode. In this mode, the timer stops the counter at the end of a single
period.
and the counter stops at the end of a single period. Set “1” to MTnRUN<MTRUN> to restart the
counter using a trigger.
The IGBT output can be set to either one-time output mode or continuous output mode.
Setting the timer (MT0IGCR<IGSNGL> = “0”) when the timer starts (MT0RUN<MTRUN> = “1”)
Setting the timer (MT0IGCR<IGSNGL> =”1”) when the timer starts (MT0RUN<MTRUN> = “1”)
For a trigger start, the counter stops until a trigger is detected. A specified trigger starts counting
Continuous output mode
One-time output mode
TMPM380/M382 - 53 / 87 -
TMPM380/M382