tmp86fh46bng TOSHIBA Semiconductor CORPORATION, tmp86fh46bng Datasheet - Page 151

• Manufacturer Part Number: tmp86fh46bng
• Description: 8 Bit Microcontroller Tlcs-870/c Series
• Manufacturer: TOSHIBA Semiconductor CORPORATION

12.3
12.3.1
12.3.2
sion of the voltage at the analog input pin specified by ADCCR1<SAIN> is thereby started.
(ADCDR1, ADCDR2) and at the same time ADCDR2<EOCF> is set to 1, the AD conversion finished inter-
rupt (INTADC) is generated.
again (Restart) during AD conversion. Before setting ADRS newly again, check ADCDR2<EOCF> to see
that the conversion is completed or wait until the interrupt signal (INTADC) is generated (e.g., interrupt han-
dling routine).
ADCCR1<ADRS>
ADCDR2<ADBF>
ADCDR1 status
ADCDR2<EOCF>
INTADC interrupt request
ADCDR1
ADCDR2
ly. In this mode, AD conversion is started by setting ADCCR1<ADRS> to “1” after setting
ADCCR1<AMD> to “11” (Repeat mode).
(ADCDR1, ADCDR2) and at the same time ADCDR2<EOCF> is set to 1, the AD conversion finished inter-
rupt (INTADC) is generated.
AD conversion, set ADCCR1<AMD> to “00” (Disable mode) by writing 0s. The AD convert operation is stop-
ped immediately. The converted value at this time is not stored in the AD converted value register.
Function
After setting ADCCR1<AMD> to “01” (software start mode), set ADCCR1<ADRS> to “1”. AD conver-
After completion of the AD conversion, the conversion result is stored in AD converted value registers
ADRS is automatically cleared after AD conversion has started. Do not set ADCCR1<ADRS> newly
AD conversion of the voltage at the analog input pin specified by ADCCR1<SAIN> is performed repeated-
After completion of the AD conversion, the conversion result is stored in AD converted value registers
In repeat mode, each time one AD conversion is completed, the next AD conversion is started. To stop
Software Start Mode
Repeat Mode
Indeterminate
AD conversion start
Figure 12-2 Software Start Mode
Conversion result
read
1st conversion result
Conversion result
read
Page 133
AD conversion start
2nd conversion result
Conversion result
read
Conversion result
read
EOCF cleared by reading
conversion result
TMP86FH46BNG