LAN9313I SMSC [SMSC Corporation], LAN9313I Datasheet - Page 79

• Manufacturer Part Number: LAN9313I
• Description: Three Port 10/100 Managed Ethernet Switch with MII
• Manufacturer: SMSC [SMSC Corporation]

Three Port 10/100 Managed Ethernet Switch with MII
Datasheet
SMSC LAN9313/LAN9313i
6.5.1.1
6.5.2
6.5.3
6.5.4
Buffer Limits and Flow Control Levels
The BM keeps track of the amount of buffers used per each ingress port. These counts are used to
generate flow control (half-duplex backpressure or full-duplex pause frames) and to limit the amount
of buffer space that can be used by any individual receiver (hard drop limit). The flow control and drop
limit thresholds are dynamic and adapt based on the current buffer usage. Based on the number of
active receiving ports, the drop level and flow control pause and resume thresholds adjust between
fixed settings and two user programmable levels via the
(BM_DROP_LVL),
Buffer Manager Flow Control Resume Level Register (BM_FC_RESUME_LVL)
The BM also keeps a count of the number of buffers that are queued for multiple ports (broadcast
queue). This count is compared against the
(BM_BCST_LVL), and if the configured drop level is reached or exceeded, subsequent packets are
dropped.
Random Early Discard (RED)
Based on the ingress flow monitoring detailed in
on page
if the Drop on Red bit in the
Yellow bit in the
randomly discarded based on the moving average number of buffers used by the ingress port.
The probability of a discard is programmable into the Random Discard Weight table via the
Manager Random Discard Table Command Register
Manager Random Discard Table Write Data Register
Manager Random Discard Table Read Data Register
Random Discard Weight table contains sixteen entries, each 10-bits wide. Each entry corresponds to
a range of the average number of buffers used by the ingress port. Entry 0 is for 0 to 15 buffers, entry
1 is for 16 to 31 buffers, etc. The probability for each entry us set in 1/1024’s. For example, a setting
of 1 is 1-in-1024, or approximately 0.1%. A setting of all ones (1023) is 1023-in-1024, or approximately
99.9%.
Refer to
(BM_RNDM_DSCRD_TBL_CMD)," on page 366
Random Discard Weight table.
Transmit Queues
Once a packet has been completely received, it is queued for transmit. There are four queues per
transmit port, one for each level of transmit priority. Each queue is virtual (if there are no packets for
that port/priority, the queue is empty), and dynamic (a queue may be any length if there is enough
memory space). When a packet is read from the memory and sent out to the corresponding port, the
used buffers are released.
Transmit Priority Queue Servicing
When a transmit queue is non-empty, it is serviced and the packet is read from the buffer RAM and
sent to the transmit MAC. If there are multiple queues that require servicing, one of two methods may
be used: fixed priority ordering, or weighted round-robin ordering. If the Fixed Priority Queue Servicing
bit in the
selected. Transmit queue 3 has the highest priority, followed by 2, 1, and 0. If the Fixed Priority Queue
Servicing bit in the
robin order is followed. Assuming all four queues are non-empty, the service is weighted with a 9:4:2:1
ratio (queue 3,2,1,0). The servicing is blended to avoid burstiness (e.g. queue 3, then queue 2, then
queue 3, etc.).
73, packets are colored as Green, Yellow, or Red. Packets colored Red are always discarded
Buffer Manager Configuration Register (BM_CFG)
Section 13.3.4.10, "Buffer Manager Random Discard Table Command Register
Buffer Manager Configuration Register (BM_CFG)
Buffer Manager Flow Control Pause Level Register
Buffer Manager Configuration Register (BM_CFG)
Buffer Manager Configuration Register (BM_CFG)
DATASHEET
79
Buffer Manager Broadcast Buffer Level Register
Section 6.4.6, "Ingress Flow Metering and Coloring,"
for additional details on writing and reading the
(BM_RNDM_DSCRD_TBL_WDATA), and
(BM_RNDM_DSCRD_TBL_CMD),
(BM_RNDM_DSCRD_TBL_RDATA). The
Buffer Manager Drop Level Register
is set, a strict order, fixed priority is
is set, packets colored Yellow are
is cleared, a weighted round-
(BM_FC_PAUSE_LVL), and
respectively.
is set. If the Drop on
Revision 1.2 (04-08-08)
Buffer
Buffer
Buffer