MC9S08GT16 MOTOROLA [Motorola, Inc], MC9S08GT16 Datasheet - Page 257

• Manufacturer Part Number: MC9S08GT16
• Description: Microcontrollers
• Manufacturer: MOTOROLA [Motorola, Inc]

ARMF — Arm Flag
CNT3:CNT2:CNT1:CNT0 — FIFO Valid Count
Freescale Semiconductor
While DBGEN = 1, this status bit is a read-only image of the ARM bit in DBGC. This bit is set by
writing 1 to the ARM control bit in DBGC (while DBGEN = 1) and is automatically cleared at the end
of a debug run. A debug run is completed when the FIFO is full (begin trace) or when a trigger event
is detected (end trace). A debug run can also be ended manually by writing 0 to the ARM or DBGEN
bits in DBGC.
These bits are cleared at the start of a debug run and indicate the number of words of valid data in the
FIFO at the end of a debug run. The value in CNT does not decrement as data is read out of the FIFO.
The external debug host is responsible for keeping track of the count as information is read out of the
FIFO.
1 = Debugger armed.
0 = Debugger not armed.
CNT[3:0]
0000
0001
0010
0011
0100
0101
0110
0111
1000
MC9S08GB/GT Data Sheet, Rev. 2.3
Table 15-3. CNT Status Bits
Valid Words in FIFO
No valid data
1
2
3
4
5
6
7
8
Registers and Control Bits
257