CDB5534U Cirrus Logic Inc, CDB5534U Datasheet - Page 16

• Manufacturer Part Number: CDB5534U
• Description: EVAL BOARD FOR CS5534
• Manufacturer: Cirrus Logic Inc

Specifications of CDB5534U

• Number Of Adc's: 1
• Number Of Bits: 24
• Sampling Rate (per Second): 3.84k
• Data Interface: Serial
• Inputs Per Adc: 2 Single
• Input Range: 0 ~ 2.5 V
• Power (typ) @ Conditions: 35mW @ 5 V
• Voltage Supply Source: Analog and Digital, Dual ±
• Operating Temperature: -40°C ~ 85°C
• Utilized Ic / Part: CS5534
• Description/function: Audio DSPs
• Operating Supply Voltage: 5 V
• Product: Audio Modules
• For Use With/related Products: C8051F320
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
• Other names: 598-1016

2.3
To collect a sample data set:
2.4
Once collected, data can be printed or saved to a file for later use. To save or print data, click on the Output
button in the Data Collection Window. A small panel will pop up with three options:
2.5
To load a previously saved file:
2.6
The evaluation software provides three types of analysis - Time Domain, Frequency Domain, and Histo-
gram. The Time Domain analysis processes acquired conversions to produce a plot of conversion sample
number versus magnitude. The Frequency Domain analysis processes acquired conversions to produce
a magnitude versus frequency plot using the Fast-Fourier transform (results up to Fs/2 are calculated and
plotted). Also, performance parameters are also calculated and displayed. The Histogram analysis test
processes acquired conversions to produce a histogram plot. Statistical noise calculations are also calcu-
lated and displayed. For more information on Histograms, refer to Application Note 37.
16
1) In the Data Collection Window, select the Config button to bring up the Configuration Window and
2) Select the appropriate settings from the available options (see the section on the Configuration
3) The Data Collection Window should still be visible. In the Setup box, select the Setup number you
4) Select the Collect button to begin collecting data.
5) Data is sent directly to the PC through the USB cable. Depending on the value of the WR bits in
6) Once the data has been collected, it can be analyzed, printed, or saved to disk.
1) Output Data File: Brings up the File Save dialog box, which allows the data to be saved to a file.
2) Print Screen: Prints the entire display, including the calculated statistics.
3) Print Graph: Prints the information in the plot area. The statistical information is not printed.
1) Pull down the Setup option and select Disk. A file menu will appear.
2) Find the data file in the list and select it. Press the Select button to return.
3) Go to the Data Collection Window, and press the Collect button.
4) The data from the file should appear on the screen. To select a different file, repeat the procedure.
Collecting Data Sets
view the current settings.
Window) and select the Accept button.
want to use to perform conversions.
the selected Setup and the number of samples being collected, this process may take several min-
utes. The process can be terminated by pressing the Stop button, but if this is done, the user
should also press Reset on the CDB5534U board to bring the microcontroller out of the collection
routines.
Saving and Printing Data
Retrieving Saved Data From a File
Analyzing Data
CDB5534U
DS289DB6