PIC16C770-I/SO Microchip Technology, PIC16C770-I/SO Datasheet - Page 19

• Manufacturer Part Number: PIC16C770-I/SO
• Description: IC MCU OTP 2KX14 A/D PWM 20-SOIC
• Manufacturer: Microchip Technology
• Series: PIC® 16Cr

Specifications of PIC16C770-I/SO

• Core Size: 8-Bit
• Program Memory Size: 3.5KB (2K x 14)
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Core Processor: PIC
• Speed: 20MHz
• Connectivity: I²C, SPI
• Number Of I /o: 15
• Program Memory Type: OTP
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4 V ~ 5.5 V
• Data Converters: A/D 6x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SOIC (7.5mm Width)
• Controller Family/series: PIC16C
• No. Of I/o's: 16
• Ram Memory Size: 256Byte
• Cpu Speed: 20MHz
• No. Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: ISPICR1 - ADAPTER IN-CIRCUIT PROGRAMMINGAC164028 - MODULE SKT PROMATEII 20SOIC/DIP309-1013 - ADAPTER 20-SOIC TO 20-DIP309-1012 - ADAPTER 20-SOIC TO 20-DIP
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: PIC16C770I/SO

2.2.2.4
This register contains the individual enable bits for the
peripheral interrupts.
REGISTER 2-4:
2002 Microchip Technology Inc.
bit 7
bit 6
bit 5-4
bit 3
bit 2
bit 1
bit 0
PIE1 REGISTER
PERIPHERAL INTERRUPT ENABLE REGISTER 1 (PIE1: 8Ch)
Unimplemented: Read as ’0’
ADIE: A/D Converter Interrupt Enable bit
1 = Enables the A/D interrupt
0 = Disables the A/D interrupt
Unimplemented: Read as ’0’
SSPIE: Synchronous Serial Port Interrupt Enable bit
1 = Enables the SSP interrupt
0 = Disables the SSP interrupt
CCP1IE: CCP1 Interrupt Enable bit
1 = Enables the CCP1 interrupt
0 = Disables the CCP1 interrupt
TMR2IE: TMR2 to PR2 Match Interrupt Enable bit
1 = Enables the TMR2 to PR2 match interrupt
0 = Disables the TMR2 to PR2 match interrupt
TMR1IE: TMR1 Overflow Interrupt Enable bit
1 = Enables the TMR1 overflow interrupt
0 = Disables the TMR1 overflow interrupt
bit 7
Legend:
R = Readable bit
- n = Value at POR
U-0
—
R/W-0
ADIE
U-0
—
W = Writable bit
’1’ = Bit is set
U-0
—
Note:
PIC16C717/770/771
SSPIE
R/W-0
U = Unimplemented bit, read as ‘0’
’0’ = Bit is cleared
Bit PEIE (INTCON<6>) must be set to
enable any peripheral interrupt.
CCP1IE
R/W-0
x = Bit is unknown
TMR2IE
R/W-0
DS41120B-page 17
TMR1IE
R/W-0
bit 0