C8051F705-GM Silicon Laboratories Inc, C8051F705-GM Datasheet - Page 84

• Manufacturer Part Number: C8051F705-GM
• Description: IC 8051 MCU 15K FLASH 48-QFN
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F70xr

Specifications of C8051F705-GM

• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Cap Sense, POR, PWM, WDT
• Number Of I /o: 39
• Program Memory Size: 15KB (15K x 8)
• Program Memory Type: FLASH
• Eeprom Size: 32 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 48-QFN
• Processor Series: C8051F7x
• Core: 8051
• Data Bus Width: 8 bit
• Data Ram Size: 512 B
• Interface Type: I2C, SMBus, SPI, UART
• Maximum Clock Frequency: 25 MHz
• Number Of Programmable I/os: 39
• Number Of Timers: 4
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: PK51, CA51, A51, ULINK2
• Development Tools By Supplier: C8051F700DK
• Minimum Operating Temperature: - 40 C
• Height: 0.95 mm
• Length: 7 mm
• Supply Voltage (max): 1.9 V, 3.6 V
• Supply Voltage (min): 1.7 V, 1.8 V
• Width: 7 mm
• For Use With: 336-1635 - DEV KIT FOR C8051F700
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Data Converters: -
• Lead Free Status / Rohs Status: Details
• Other names: 336-1612-5

C8051F70x/71x
15.5. CS0 Comparator
The CS0 comparator compares the latest capacitive sense conversion result with the value stored in
CS0THH:CS0THL. If the result is less than or equal to the stored value, the CS0CMPF bit(CS0CN:0) is set
to 0. If the result is greater than the stored value, CS0CMPF is set to 1.
If the CS0 conversion accumulator is configured to accumulate multiple conversions, a comparison will not
be made until the last conversion has been accumulated.
An interrupt will be generated if CS0 greater-than comparator interrupts are enabled by setting the ECS-
GRT bit (EIE2.1) when the comparator sets CS0CMPF to 1.
If auto-scan is running when the comparator sets the CS0CMPF bit, no further auto-scan initiated conver-
sions will start until firmware sets CS0BUSY to 1.
A CS0 greater-than comparator event can wake a device from suspend mode. This feature is useful in sys-
tems configured to continuously sample one or more capacitive sense channels. The device will remain in
the low-power suspend state until the captured value of one of the scanned channels causes a CS0
greater-than comparator event to occur. It is not necessary to have CS0 comparator interrupts enabled in
order to wake a device from suspend with a greater-than event.
For a summary of behavior with different CS0 comparator, auto-scan, and auto accumulator settings,
please see Table 15.2.
84
Rev. 1.0