HD64F7047F50V Renesas Electronics America, HD64F7047F50V Datasheet - Page 228

• Manufacturer Part Number: HD64F7047F50V
• Description: IC H8 MCU FLASH 256K 100TQFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50V

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-TQFP, 100-VQFP
• Package: 100PQFP
• Family Name: SuperH
• Maximum Speed: 50 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 32 Bit
• Number Of Programmable I/os: 53
• Interface Type: CAN/SCI
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 7
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

10.3.8
TSTR is an 8-bit readable/writable register that selects operation/stoppage for channels 0 to 4.
When setting the operating mode in TMDR or setting the count clock in TCR, first stop the TCNT
counter.
Rev. 2.00, 09/04, page 186 of 720
Bit
7
6
5 to 3 
2
1
0
Bit Name
CST4
CST3
CST2
CST1
CST0
Timer Start Register (TSTR)
Initial
value
0
0
All 0
0
0
0
R/W
R/W
R/W
R
R/W
R/W
R/W
Description
Counter Start 4 and 3
These bits select operation or stoppage for TCNT.
If 0 is written to the CST bit during operation with the TIOC
pin designated for output, the counter stops but the TIOC
pin output compare output level is retained. If TIOR is
written to when the CST bit is cleared to 0, the pin output
level will be changed to the set initial output value.
0: TCNT_4 and TCNT_3 count operation is stopped
1: TCNT_4 and TCNT_3 performs count operation
Reserved
These bits are always read as 0. Only 0 should be written to
these bits.
Counter Start 2 to 0
These bits select operation or stoppage for TCNT.
If 0 is written to the CST bit during operation with the TIOC
pin designated for output, the counter stops but the TIOC
pin output compare output level is retained. If TIOR is
written to when the CST bit is cleared to 0, the pin output
level will be changed to the set initial output value.
0: TCNT_2 to TCNT_0 count operation is stopped
1: TCNT_2 to TCNT_0 performs count operation