ATTINY4-TSHR Atmel, ATTINY4-TSHR Datasheet - Page 99

• Manufacturer Part Number: ATTINY4-TSHR
• Description: IC MCU AVR 512B FLASH SOT-23-6
• Manufacturer: Atmel
• Series: AVR® ATtinyr

Specifications of ATTINY4-TSHR

• Package / Case: SOT-23-6
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 12MHz
• Number Of I /o: 4
• Core Processor: AVR
• Program Memory Type: FLASH
• Ram Size: 32 x 8
• Program Memory Size: 512B (512 x 8)
• Oscillator Type: Internal
• Peripherals: POR, PWM, WDT
• Core Size: 8-Bit
• Controller Family/series: ATtiny
• No. Of I/o's: 4
• Ram Memory Size: 32Byte
• Cpu Speed: 12MHz
• No. Of Timers: 1
• Rohs Compliant: Yes
• Processor Series: ATTINY4x
• Core: AVR8
• Data Bus Width: 8 bit
• Data Ram Size: 32 B
• Interface Type: ISP
• Maximum Clock Frequency: 12 MHz
• Number Of Programmable I/os: 4
• Number Of Timers: 1
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: EWAVR, EWAVR-BL
• Development Tools By Supplier: ATAVRDRAGON, ATSTK500, ATSTK600, ATAVRISP2, ATAVRONEKIT
• Minimum Operating Temperature: - 40 C
• Package: 6SOT-23
• Device Core: AVR
• Family Name: ATtiny
• Maximum Speed: 12 MHz
• Operating Supply Voltage: 2.5|3.3|5 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Data Converters: -
• Connectivity: -
• Lead Free Status / Rohs Status: Details

14.3.2
14.3.3
14.3.4
14.3.5
8127D–AVR–02/10
Disabling
Frame Format
Parity Bit Calculation
Supported Characters
Provided that the NVM enable bit has been cleared, the TPI is automatically disabled if the
RESET pin is released to inactive high state or, alternatively, if V
RESET pin.
If the NVM enable bit is not cleared a power down is required to exit TPI programming mode.
See NVMEN bit in
The TPI physical layer supports a fixed frame format. A frame consists of one character, eight
bits in length, and one start bit, a parity bit and two stop bits. Data is transferred with the least
significant bit first.
Figure 14-4. Serial frame format.
Symbols used in
The parity bit is always calculated using even parity. The value of the bit is calculated by doing
an exclusive-or of all the data bits, as follows:
where:
The BREAK character is equal to a 12 bit long low level. It can be extended beyond a bit-length
of 12.
Figure 14-5. Supported characters.
TPIDATA
TPIDATA
TPICLK
TPIDATA
ST:
D0-D7: Data bits (least significant bit sent first)
P:
SP1:
SP2:
P = D0
P:
D0-D7:
IDLE
IDLE
⊗
IDLE
Start bit (always low)
Parity bit (using even parity)
Stop bit 1 (always high)
Stop bit 2 (always high)
D1
Figure
“TPISR – Tiny Programming Interface Status Register” on page
⊗
ST
ST
Parity bit using even parity
Data bits of the character
D2
14-4:
⊗
D3
D0
D0
⊗
D4
D1
D1
⊗
D5
DATA CHARACTER
BREAK CHARACTER
⊗
D6
⊗
D7
D7
⊗
D7
0
P
P
HV
ATtiny4/5/9/10
is no longer applied to the
SP1
SP1
SP2
SP2
107.
IDLE/ST
IDLE/ST
IDLE/ST
99