PIC16LF1827-I/SO Microchip Technology, PIC16LF1827-I/SO Datasheet - Page 154

• Manufacturer Part Number: PIC16LF1827-I/SO
• Description: IC MCU 8BIT 4KB FLASH 18SOIC
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF1827-I/SO

• Program Memory Type: FLASH
• Program Memory Size: 7KB (4K x 14)
• Package / Case: 18-SOIC (7.5mm Width)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 16
• Eeprom Size: 256 x 8
• Ram Size: 384 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC16LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 384 B
• Interface Type: I2C/SPI/UART
• Maximum Clock Frequency: 32 MHz
• Number Of Programmable I/os: 15
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 12-ch x 10-bit
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC16F/LF1826/27
REGISTER 16-1:
REGISTER 16-2:
DS41391B-page 154
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7
bit 6
bit 5
bit 4
bit 3-2
bit 1
bit 0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-5
bit 4-0
Note 1:
R/W-0/0
DACEN
U-0
—
The output select bits are always right justified to ensure that any number of bits can be used without
affecting the register layout.
DACEN: DAC Enable bit
1 = DAC is enabled
0 = DAC is disabled
DACLPS: DAC Low-Power Voltage State Select bit
1 = DAC Positive reference source selected
0 = DAC Negative reference source selected
DACOE: DAC Voltage Output Enable bit
1 = DAC voltage level is also an output on the DACOUT pin
0 = DAC voltage level is disconnected from the DACOUT pin
Unimplemented: Read as ‘0’
DACPSS<1:0>: DAC Positive Source Select bits
00 = V
01 = V
10 = FVR Buffer2 output
11 = Reserved, do not use
Unimplemented: Read as ‘0’
DACNSS: DAC Negative Source Select bits
1 = V
0 = V
Unimplemented: Read as ‘0’
DACR<4:0>: DAC Voltage Output Select bits
V
OUT
DACLPS
R/W-0/0
U-0
—
REF
= ((V
DACCON0: VOLTAGE REFERENCE CONTROL REGISTER 0
SS
DACCON1: VOLTAGE REFERENCE CONTROL REGISTER 1
REF
DD
-
SRC
+
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
+) - (V
R/W-0/0
DACOE
U-0
—
SRC
-))*(DACR<4:0>/(2
R/W-0/0
DACR4
U-0
Preliminary
—
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
5
DACPSS1
)) + V
R/W-0/0
R/W-0/0
DACR3
SRC
-
DACPSS0
R/W-0/0
R/W-0/0
DACR2
© 2009 Microchip Technology Inc.
R/W-0/0
DACR1
U-0
—
DACNSS
R/W-0/0
R/W-0/0
DACR0
bit 0
bit 0