PIC18LF8620T-I/PT Microchip Technology, PIC18LF8620T-I/PT Datasheet - Page 149

• Manufacturer Part Number: PIC18LF8620T-I/PT
• Description: IC MCU FLASH 32KX16 LV 80-TQFP
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18LF8620T-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 68
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.75K x 8
• Voltage - Supply (vcc/vdd): 2 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: External
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TFQFP
• Core: PIC
• Processor Series: PIC18LF
• Data Bus Width: 8 bit
• Maximum Clock Frequency: 40 MHz
• Data Ram Size: 3840 B
• Data Rom Size: 1024 B
• On-chip Adc: 16 bit
• Number Of Programmable I/os: 68
• Number Of Timers: 2 x 8 bit
• Operating Supply Voltage: 2 V to 5.5 V
• Mounting Style: SMD/SMT
• Height: 1 mm
• Interface Type: I2C, SPI, USART
• Length: 12 mm
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Supply Voltage (max): 5.5 V, 5.8 V
• Supply Voltage (min): 3.9 V, 4.2 V
• Width: 12 mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

15.0
The Timer4 module timer has the following features:
• 8-bit timer (TMR4 register)
• 8-bit period register (PR4)
• Readable and writable (both registers)
• Software programmable prescaler (1:1, 1:4, 1:16)
• Software programmable postscaler (1:1 to 1:16)
• Interrupt on TMR4 match of PR4
Timer4 has a control register shown in Register 15-1.
Timer4 can be shut-off by clearing control bit, TMR4ON
(T4CON<2>), to minimize power consumption. The
prescaler and postscaler selection of Timer4 are also
controlled by this register. Figure 15-1 is a simplified
block diagram of the Timer4 module.
REGISTER 15-1:
 2004 Microchip Technology Inc.
TIMER4 MODULE
bit 7
bit 6-3
bit 2
bit 1-0
PIC18F6520/8520/6620/8620/6720/8720
bit 7
T4CON: TIMER4 CONTROL REGISTER
Unimplemented: Read as ‘0’
T4OUTPS3:T4OUTPS0: Timer4 Output Postscale Select bits
0000 = 1:1 Postscale
0001 = 1:2 Postscale
•
•
•
1111 = 1:16 Postscale
TMR4ON: Timer4 On bit
1 = Timer4 is on
0 = Timer4 is off
T4CKPS1:T4CKPS0: Timer4 Clock Prescale Select bits
00 = Prescaler is 1
01 = Prescaler is 4
1x = Prescaler is 16
Legend:
R = Readable bit
- n = Value at POR
U-0
—
T4OUTPS3 T4OUTPS2 T4OUTPS1 T4OUTPS0 TMR4ON T4CKPS1 T4CKPS0
R/W-0
R/W-0
W = Writable bit
‘1’ = Bit is set
R/W-0
15.1
Timer4 can be used as the PWM time base for the
PWM mode of the CCP module. The TMR4 register is
readable and writable and is cleared on any device
Reset. The input clock (F
of 1:1, 1:4 or 1:16, selected by control bits
T4CKPS1:T4CKPS0 (T4CON<1:0>). The match out-
put of TMR4 goes through a 4-bit postscaler (which
gives a 1:1 to 1:16 scaling inclusive) to generate a
TMR4 interrupt, latched in flag bit, TMR4IF (PIR3<3>).
The prescaler and postscaler counters are cleared
when any of the following occurs:
• a write to the TMR4 register
• a write to the T4CON register
• any device Reset (Power-on Reset, MCLR Reset,
TMR4 is not cleared when T4CON is written.
Watchdog Timer Reset or Brown-out Reset)
Timer4 Operation
R/W-0
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
OSC
/4) has a prescale option
x = Bit is unknown
R/W-0
DS39609B-page 147
R/W-0
bit 0