HD64F3642AH Renesas Electronics America, HD64F3642AH Datasheet - Page 81

• Manufacturer Part Number: HD64F3642AH
• Description: IC H8 MCU FLASH 16K 64QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Lr

Specifications of HD64F3642AH

• Core Processor: H8/300L
• Core Size: 8-Bit
• Speed: 8MHz
• Connectivity: SCI
• Peripherals: PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 16KB (16K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 5.5 V
• Data Converters: A/D 8x8b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 64-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

3.1
Exception handling is performed in the H8/3644 Group when a reset or interrupt occurs. Table 3.1
shows the priorities of these two types of exception handling.
Table 3.1
Priority
High
Low
3.2
3.2.1
A reset is the highest-priority exception. The internal state of the CPU and the registers of the on-
chip peripheral modules are initialized.
3.2.2
Reset by RES
the reset state.
To make sure the chip is reset properly, observe the following precautions.
Reset exception handling begins when the RES pin is held low for a given period, then returned to
the high level.
At power on: Hold the RES pin low until the clock pulse generator output stabilizes.
Resetting during operation: Hold the RES pin low for at least 10 system clock cycles.
RES
RES Pin: As soon as the RES pin goes low, all processing is stopped and the chip enters
RES
Overview
Reset
Reset Sequence
Overview
Exception Source
Reset
Interrupt
Exception Handling Types and Priorities
Section 3 Exception Handling
Time of Start of Exception Handling
Exception handling starts as soon as the reset state is cleared
When an interrupt is requested, exception handling starts after
execution of the present instruction or the exception handling
in progress is completed
Rev. 6.00 Sep 12, 2006 page 59 of 526
Section 3 Exception Handling
REJ09B0326-0600