MCF5216CVM66J Freescale Semiconductor, MCF5216CVM66J Datasheet - Page 322

• Manufacturer Part Number: MCF5216CVM66J
• Description: IC MCU 512K FLASH 256MAPBGA
• Manufacturer: Freescale Semiconductor
• Series: MCF521xr

Specifications of MCF5216CVM66J

• Core Processor: Coldfire V2
• Core Size: 32-Bit
• Speed: 66MHz
• Connectivity: CAN, EBI/EMI, I²C, SPI, UART/USART
• Peripherals: DMA, LVD, POR, PWM, WDT
• Number Of I /o: 142
• Program Memory Size: 512KB (512K x 8)
• Program Memory Type: FLASH
• Ram Size: 64K x 8
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 8x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 256-MAPBGA
• Processor Series: MCF521x
• Core: ColdFire V2
• 3rd Party Development Tools: JLINK-CF-BDM26, EWCF
• Development Tools By Supplier: M52210DEMO, M52211EVB
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / Rohs Status: Details

Fast Ethernet Controller (FEC)
17.4.5
The TDAR is a command register which the user writes to indicate the transmit descriptor ring is updated
(transmit buffers have been produced by the driver with the ready bit set in the buffer descriptor).
When the register is written, the TDAR bit is set. This value is independent of the data actually written by
the user. When set, the FEC polls the transmit descriptor ring and processes transmit frames (provided
ECR[ETHER_EN] is also set). After the FEC polls a transmit descriptor that is a ready bit not set, FEC
clears the TDAR bit and ceases transmit descriptor ring polling until the user sets the bit again, signifying
additional descriptors are placed into the transmit descriptor ring.
The TDAR register is cleared at reset, when ECR[ETHER_EN] is cleared, or when ECR[RESET] is set.
17.4.6
ECR is a read/write user register, though hardware may alter fields in this register as well. The ECR
enables/disables the FEC.
17-12
31–25
RDAR
31–25
TDAR
Field
Field
23–0
23–0
24
24
IPSBAR
Offset:
Reset 0 0 0 0 0 0 0
Reserved, must be cleared.
Set to 1 when this register is written, regardless of the value written. Cleared by the FEC device when no additional
empty descriptors remain in the receive ring. Also cleared when ECR[ETHER_EN] is cleared.
Reserved, must be cleared.
W
Reserved, must be cleared.
Set to 1 when this register is written, regardless of the value written. Cleared by the FEC device when no additional
ready descriptors remain in the transmit ring. Also cleared when ECR[ETHER_EN] is cleared.
Reserved, must be cleared.
R 0 0 0 0 0 0 0
Transmit Descriptor Active Register (TDAR)
Ethernet Control Register (ECR)
0x1014
31 30 29 28 27 26 25
MCF5282 and MCF5216 ColdFire Microcontroller User’s Manual, Rev. 3
Figure 17-5. Transmit Descriptor Active Register (TDAR)
TDAR
24
0
Table 17-7. RDAR Field Descriptions
Table 17-8. TDAR Field Descriptions
23 22 21 20 19 18 17 16 15 14 13 12 11 10 9
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Description
Description
8
7
Access: User read/write
6
Freescale Semiconductor
5
4
3
2
1
0