UPD70F3743GJ-GAE-AX Renesas Electronics America, UPD70F3743GJ-GAE-AX Datasheet - Page 795

• Manufacturer Part Number: UPD70F3743GJ-GAE-AX
• Description: MCU 32BIT V850ES/JX3 144-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3r

Specifications of UPD70F3743GJ-GAE-AX

• Core Processor: RISC
• Core Size: 32-Bit
• Speed: 32MHz
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Peripherals: DMA, LVD, PWM, WDT
• Number Of I /o: 128
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 2.85 V ~ 3.6 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

V850ES/JJ3
R01UH0016EJ0400 Rev.4.00
Sep 30, 2010
(3) When pseudo real-time RAM monitor (RRM) function and DMM function do not operate
(4) Standby release with pseudo RRM and DMM functions enabled
(5) Writing to peripheral I/O registers that requires a specific sequence, using DMM function
(6) Flash self programming
• Interrupts are disabled (DI)
• Interrupts issued for the serial interface, which is used for communication between MINICUBE2 and the target
• Standby mode is entered while standby release by a maskable interrupt is prohibited
• Mode for communication between MINICUBE2 and the target device is UARTA0, and the main clock has been
• Mode for communication between MINICUBE2 and the target device is UARTA0, and a clock different from the
• Mode for communication between MINICUBE2 and the target device is CSIB0 or CSIB3
• Mode for communication between MINICUBE2 and the target device is UARTA0, and the main clock has been
The pseudo RRM function and DMM function do not operate if one of the following conditions is satisfied.
The standby mode is released by the pseudo RRM function and DMM function if one of the following conditions is
satisfied.
Peripheral I/O registers that requires a specific sequence cannot be written with the DMM function.
If a space where the debug monitor program is allocated is rewritten by flash self programming, the debugger can
no longer operate normally.
device, are masked
stopped
one specified in the debugger is used for communication
supplied.
CHAPTER 28 ON-CHIP DEBUG FUNCTION
Page 779 of 892