HD6413008VXI25 Renesas Electronics America, HD6413008VXI25 Datasheet - Page 486

• Manufacturer Part Number: HD6413008VXI25
• Description: MCU 3V 0K I-TEMP 100-TQFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8/300Hr

Specifications of HD6413008VXI25

• Core Processor: H8/300H
• Core Size: 16-Bit
• Speed: 25MHz
• Connectivity: SCI, SmartCard
• Peripherals: PWM, WDT
• Number Of I /o: 35
• Program Memory Type: ROMless
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 8x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -
• Program Memory Size: -

15. D/A Converter
15.2.3
DASTCR is an 8-bit readable/writable register that enables or disables D/A output in software
standby mode.
DASTCR is initialized to H'FE by a reset and in hardware standby mode. It is not initialized in
software standby mode.
Bits 7 to 1—Reserved: These bits cannot be modified and are always read as 1.
Bit 0—D/A Standby Enable (DASTE): Enables or disables D/A output in software standby
mode.
1
15.3
The D/A converter has two built-in D/A conversion circuits that can perform conversion
independently.
D/A conversion is performed constantly while enabled in DACR. If the DADR0 or DADR1 value
is modified, conversion of the new data begins immediately. The conversion results are output
when bits DAOE0 and DAOE1 are set to 1.
Rev.4.00 Aug. 20, 2007 Page 440 of 638
REJ09B0395-0400
Bit 0
DASTE
0
Bit
Initial value
Read/Write
D/A Standby Control Register (DASTCR)
Operation
D/A output is disabled in software standby mode
D/A output is enabled in software standby mode
Description
⎯
⎯
7
1
⎯
⎯
6
1
⎯
⎯
5
1
Reserved bits
⎯
⎯
4
1
⎯
⎯
3
1
D/A standby enable
Enables or disables D/A output
in software standby mode
⎯
⎯
2
1
⎯
⎯
1
1
(Initial value)
DASTE
R/W
0
0