MCIMX357DVM5B Freescale Semiconductor, MCIMX357DVM5B Datasheet - Page 67

• Manufacturer Part Number: MCIMX357DVM5B
• Description: PROCESSOR MULTIMEDIA 400PBGA
• Manufacturer: Freescale Semiconductor
• Series: i.MX35r

Specifications of MCIMX357DVM5B

• Core Processor: ARM11
• Core Size: 32-Bit
• Speed: 532MHz
• Connectivity: 1-Wire, CAN, EBI/EMI, Ethernet, I²C, MMC, SPI, SSI, UART/USART, USB OTG
• Peripherals: DMA, I²S, LCD, POR, PWM, WDT
• Number Of I /o: 96
• Program Memory Type: ROMless
• Ram Size: 128K x 8
• Voltage - Supply (vcc/vdd): 1.33 V ~ 1.47 V
• Oscillator Type: External
• Operating Temperature: -20°C ~ 70°C
• Package / Case: 400-BGA
• Operating Temperature (min): -20C
• Operating Temperature (max): 70C
• Operating Temperature Classification: Commercial
• Mounting: Surface Mount
• Embedded Interface Type: CAN, I2C, SPI, UART, USB
• Digital Ic Case Style: BGA
• No. Of Pins: 400
• Operating Temperature Range: -20°C To +70°C
• Processor Type: I.MX35
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Program Memory Size: -
• Data Converters: -
• Lead Free Status / Rohs Status: Compliant

inserted in between EAV and SAV code. The CSI decodes and filters out the timing coding from the data
stream, thus recovering SENSB_VSYNC and SENSB_HSYNC signals for internal use.
4.9.12.2.2
The SENSB_VSYNC, SENSB_HSYNC, and SENSB_PIX_CLK signals are used in this mode. See
Figure
A frame starts with a rising edge on SENSB_VSYNC (all the timing corresponds to straight polarity of the
corresponding signals). Then SENSB_HSYNC goes to high and hold for the entire line. The pixel clock
is valid as long as SENSB_HSYNC is high. Data is latched at the rising edge of the valid pixel clocks.
SENSB_HSYNC goes to low at the end of the line. Pixel clocks then become invalid and the CSI stops
receiving data from the stream. For the next line, the SENSB_HSYNC timing repeats. For the next frame,
the SENSB_VSYNC timing repeats.
4.9.12.2.3
The timing is the same as the gated-clock mode (described in
except for the SENSB_HSYNC signal, which is not used. See
valid and will cause data to be latched into the input FIFO. The SENSB_PIX_CLK signal is inactive (states
low) until valid data is going to be transmitted over the bus.
Freescale Semiconductor
45.
SENSB_DATA[9:0]
SENSB_PIX_CLK
SENSB_DATA[7:0]
SENSB_HSYNC
SENSB_VSYNC
SENSB_PIX_CLK
SENSB_VSYNC
Gated Clock Mode
Non-Gated Clock Mode
Start of Frame
i.MX35 Applications Processors for Industrial and Consumer Products, Rev. 9
Start of Frame
invalid
invalid
Figure 46. Non-Gated Clock Mode Timing Diagram
nth frame
nth frame
Figure 45. Gated Clock Mode Timing Diagram
1st byte
1st byte
Active Line
n+1th frame
invalid
n+1th frame
Section 4.9.12.2.2, “Gated Clock
invalid
Figure
46. All incoming pixel clocks are
1st byte
1st byte
Mode”),
67