20-101-1207 Rabbit Semiconductor, 20-101-1207 Datasheet - Page 110

• Manufacturer Part Number: 20-101-1207
• Description: RCM4510W FCC CERTIFIED
• Manufacturer: Rabbit Semiconductor
• Type: Transceiver, 802.15.4/ZigBeer

Specifications of 20-101-1207

• Frequency: 2.4GHz
• Wireless Frequency: 29.49 MHz
• For Use With/related Products: RCM4510W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1144

D.2 Digi
You may experience difficulty when you use the ZigBee sample programs and the Digi
XBee USB with the default settings if you are working simultaneously with more than one
ZigBee coordinator.
Section 6.2.2 explains how to set up the RCM4510W configuration patterns for the sample
programs via macros in the Dynamic C
library folder.
The same configurations must then be applied to the Digi
utility. If you have not previously used this utility, install it from the Dynamic C
Utilities\X-CTU
the version number),
Continue the following steps with the Digi
Since the ZigBee Utility
ZigBee Utility if it is running.
1. Start X-CTU from the desktop icon and set the “PC Settings” tab to
2. On the “PC Settings” tab, check the “Enable API” box under “Host Setup.”
104
Extended PAN ID — the 64-bit network ID.
Defaults to
Dynamic C
XBEE_API.LIB
to
default used on the Digi
If set to
random extended PAN ID,” and tells routers
and end devices to “join any network.”
Change the extended PAN ID if you are
developing simultaneously with more than
one ZigBee coordinator.
Channel mask — defaults to 0x1FFE, i.e., all 12 possible channels via the macro in the
Dynamic C
For example, to limit the channels to three channels, the macro would read as follows.
HARDWARE
#define DEFAULT_EXTPANID
"0x0123456789abcdef"
0x0123456789abcdef
#define DEFAULT_CHANNELS ZB_DEFAULT_CHANNELS
#define DEFAULT_CHANNELS 0x000E
0x00
®
DEFAULT_PANID
LIB\Rabbit4000\XBee\
XBee USB Configuration
, tells coordinators to “select a
LIB\Rabbit4000\ZigBee\XBEE_API.LIB
flow control,
library, otherwise defaults
ZB
folder by double-clicking
XBEE_GPIO_GUI.exe
®
XBee USB.
to match the
8
if set in the
data bits, parity
LIB\Rabbit4000\XBee\XBEE_API.LIB
®
XBee USB connected to your PC’s USB port.
PAN ID — the network ID. Defaults to
0x0234 via the macro in the Dynamic C
LIB\Rabbit4000\XBee\XBEE_API.LIB
library. Change the PAN ID if you are
developing simultaneously with more than
one ZigBee coordinator.
Setup_XCTU_xxxx.exe
#define DEFAULT_PANID 0x0234
will conflict with X-CTU, first close the
NONE
,
1
®
XBee USB via Digi’s X-CTU
stop bit.
library.
ZNet 2.5
RabbitCore RCM4500W
115200
(where
baud,
xxxx
®
is