20-101-1207 Rabbit Semiconductor, 20-101-1207 Datasheet - Page 92

• Manufacturer Part Number: 20-101-1207
• Description: RCM4510W FCC CERTIFIED
• Manufacturer: Rabbit Semiconductor
• Type: Transceiver, 802.15.4/ZigBeer

Specifications of 20-101-1207

• Frequency: 2.4GHz
• Wireless Frequency: 29.49 MHz
• For Use With/related Products: RCM4510W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1144

•
•
•
•
86
Analog Inputs Header
sented at header J3 on the Prototyping Board. These analog signals are connected via
attenuator/filter circuits on the Prototyping Board to the corresponding analog inputs on
the RCM4510W module.
RS-232
ing Board at header J4. A 10-pin 0.1" pitch header strip installed at J4 allows you to
connect a ribbon cable that leads to a standard DE-9 serial connector.
Current Measurement Option
bottom side of the Prototyping Board and install a 1 × 2 header strip from the Develop-
ment Kit to allow you to use an ammeter across the pins to measure the current drawn
from the +5 V supply. Similarly, you may cut the trace below header JP2 on the bottom
side of the Prototyping Board and install a 1 × 2 header strip from the Development Kit
to allow you to use an ammeter across the pins to measure the current drawn from the
+3.3 V supply.
Backup Battery
battery backup for the RCM4510W SRAM and real-time clock.
NOTE: No analog signals are available on the Prototyping Board with the RCM4510W
RabbitCore module installed since no analog signals are present on the RCM4510W’s
header J1. The auxiliary I/O on the RCM4510W’s header J4 cannot be used with the
Prototyping Board without modifying the Prototyping Board.
—Two 3-wire or one 5-wire RS-232 serial ports are available on the Prototyp-
—A 2032 lithium-ion battery rated at 3.0 V, 220 mA·h, provides
—The analog signals from the RabbitCore module are pre-
—You may cut the trace below header JP1 on the
RabbitCore RCM4500W