20-101-1207 Rabbit Semiconductor, 20-101-1207 Datasheet - Page 12

• Manufacturer Part Number: 20-101-1207
• Description: RCM4510W FCC CERTIFIED
• Manufacturer: Rabbit Semiconductor
• Type: Transceiver, 802.15.4/ZigBeer

Specifications of 20-101-1207

• Frequency: 2.4GHz
• Wireless Frequency: 29.49 MHz
• For Use With/related Products: RCM4510W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1144

1.3.2 Software
The RCM4510W preview version is programmed using version 10.11 or later of Dynamic C,
and the standard version requires version 10.21 or later.
the Development Kit CD-ROM.
Starting with Dynamic C version 10.40, Dynamic C includes the popular µC/OS-II real-
time operating system, point-to-point protocol (PPP), FAT file system, RabbitWeb, and
other select libraries. Rabbit also offers for purchase the Rabbit Embedded Security Pack
featuring the Secure Sockets Layer (SSL) and a specific Advanced Encryption Standard
(AES) library.
In addition to the Web-based technical support included at no extra charge, a one-year
telephone-based technical support module is also available for purchase. Visit our Web
site at
tor for further information.
1.3.2.1 XBee Firmware
There are two types of XBee firmware available for the RCM4510W — ZNet 2.5 and
ZigBee PRO. The firmware preloaded at the factory on your RCM4510W is indicated
with the model number and is reflected in different part numbers (see Table 1). A label on
the XBee RF module identifies the factory-installed firmware type. Older RCM4510W
modules shipped with ZNet firmware and do not have a sticker on their XBee RF module.
• ZNet 2.5 is a networking solution that was developed around an earlier draft of the Zig-
• ZB firmware was developed using the ZigBee PRO feature set and provides the most
6
Bee standard, and will work only with the MaxStream or Digi International
modules used with the RCM4510W or with the preview version of the RCM4510W.
Applications built around ZNet 2.5 may be upgraded to the ZB solution by loading the
ZB firmware (standard release RCM4510W RabbitCore modules only) and by recom-
piling the application using Dynamic C v. 10.46 or later.
advanced ZigBee networking capabilities that will interface with any other devices
based on the ZigBee PRO standard adopted in 2007.
Dynamic C v. 10.46 and later versions support the ZB firmware with a 64-bit extended
PAN ID instead of a 16-bit PAN ID
Rabbit recommends ZB firmware for new customers and new applications.
www.rabbit.com
NOTE: While both ZNet 2.5 and ZB firmware types are technically ZigBee, the protocol
layer in them is different and devices with one type of firmware will not function in a
network with devices using the other firmware.
or contact your Rabbit sales representative or authorized distribu-
A compatible version is included on
RabbitCore RCM4500W
®
XBee
®
RF