ADL5375-05ACPZ-R7 Analog Devices Inc, ADL5375-05ACPZ-R7 Datasheet - Page 8

• Manufacturer Part Number: ADL5375-05ACPZ-R7
• Description: IC MOD QUAD 400MHZ-6GHZ 24LFCSP
• Manufacturer: Analog Devices Inc

Specifications of ADL5375-05ACPZ-R7

• Design Resources: Interfacing ADL5375 to AD9779A Dual-Channel, 1 GSPS High Speed DAC (CN0021) Broadband Low EVM Direct Conversion Transmitter (CN0134)
• Function: Modulator
• Lo Frequency: 400MHz ~ 6GHz
• Rf Frequency: 400MHz ~ 6GHz
• P1db: 10.4dBm
• Noise Floor: -157.6dBm/Hz
• Output Power: 1.71dBm
• Current - Supply: 200mA
• Voltage - Supply: 4.75 V ~ 5.25 V
• Test Frequency: 3.5GHz
• Package / Case: 24-VFQFN, 24-CSP Exposed Pad
• Frequency Range: 400MHz To 6GHz
• Rf Type: Quadrature
• Supply Voltage Range: 4.75V To 5.25V
• Rf Ic Case Style: LFCSP
• No. Of Pins: 24
• Operating Temperature Range: -40°C To +85°C
• Frequency Max: 6GHz
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: ADL5375-05ACPZ-R7TR

ADL5375
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
Table 3. Pin Function Descriptions
Pin No.
1
2, 5, 8, 11, 12,
14, 17, 19, 20, 23
3, 4
6, 7, 13, 15,
9, 10, 21, 22
16
18, 24
Mnemonic
DSOP
COMM
LOIP, LOIN
NC
QBBN, QBBP,
IBBP, IBBN
RFOUT
VPS1, VPS2
EP
Description
Output Disable. A logic high on this pin disables the RF output. Connect this pin to ground or leave it
floating to enable the output.
Input Common Pins. Connect to the ground plane via a low impedance path.
Local Oscillator Inputs.
Single-ended operation: The LOIP pin is driven from the LO source through an ac-coupling capacitor
while the LOIN pin is ac-coupled to ground through a capacitor.
Differential operation: The LOIP and LOIN pins must be driven differentially through ac-coupling
capacitors in this mode of operation.
No Connect. These pins can be left open or tied to ground.
Differential In-Phase and Quadrature Baseband Inputs. These high impedance inputs should be
dc-biased to the recommended level depending on the version.
These inputs should be driven from a low impedance source. Nominal characterized ac signal swing is
500 mV p-p on each pin. This results in a differential drive of 1 V p-p. These inputs are not self-biased
and have to be externally biased.
RF Output. Single-ended, 50 Ω internally biased RF output. RFOUT must be ac-coupled to the load.
Positive Supply Voltage Pins. All pins should be connected to the same supply (V
external bypassing, connect 0.1 μF and 1000 pF capacitors between each pin and ground.
Exposed Paddle. Connect to the ground plane via a low impedance path.
ADL5375-05: 500 mV
ADL5375-15: 1500 mV
COMM
COMM
DSOP
LOIN
LOIP
NC
1
2
3
4
5
6
Figure 2. Pin Configuration
Rev. A | Page 8 of 32
(Not to Scale)
ADL5375
TOP VIEW
18
17
16
15
14
13
VPS1
COMM
RFOUT
NC
COMM
NC
S
). To ensure adequate