XTH9-MI-128 Digi International/Maxstream, XTH9-MI-128 Datasheet - Page 43

• Manufacturer Part Number: XTH9-MI-128
• Description: MODULE RF 900MHZ 1W 115K W/MMCX
• Manufacturer: Digi International/Maxstream

Specifications of XTH9-MI-128

• Frequency: 900MHz
• Data Rate - Maximum: 230kbps
• Modulation Or Protocol: FHSS, FSK
• Power - Output: 30dBm
• Sensitivity: -110dBm
• Voltage - Supply: 3.3V, 5V
• Current - Receiving: 80mA
• Current - Transmitting: 260mA
• Data Interface: Connector, 2 x 10 Header
• Antenna Connector: MMCX
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Applications: -
• Memory Size: -

XTend™ RF Module ‐ Product Manual v2.x6x
Addressing
Address Recognition
Each RF packet contains addressing information that is used to filter incoming RF data. Receiving
modules inspect the Hopping Channel (HP parameter), Vendor Identification Number (ID parame-
ter) and Destination Address (DT parameter) contained in each RF packet. Data that does not pass
through all three network security layers is discarded.
Figure 4‐01. Addressing layers contained in the RF packet header
Transmissions can be addressed to a specific module or group of modules using the DT (Destina-
tion Address) and MK (Address Mask) commands. A receiving module will only accept a packet if it
determines the packet is addressed to it, either as a global or local packet. The receiving module
makes this determination by inspecting the destination address of the packet and comparing it to
its own address and address mask [refer to the figure below].
Figure 4‐02. Address Recognition (@ the Receiving RF Module)
The transmitting module determines whether the packet is intended for a specific node (local
address) or multiple nodes (global address) by comparing the packet's destination address (DT)
and its own address mask (MK) [refer to the figure below]. It is assumed that the address masks
on the transmitting module and receiving module have been programmed to the same value for
proper operation in each RF Communication Mode.
Figure 4‐03. Address Recognition (@ the Transmitting RF Module)
© 2010 Digi Internatonal, Inc.
TX_DT = Destination Address of transmitting module
RX_DT = Destination Address of receiving module
RX_MK = Address Mask of receiving module
RX_MY = Source Address of receiving module
43