SI4010-B1-GT Silicon Laboratories Inc, SI4010-B1-GT Datasheet - Page 122

• Manufacturer Part Number: SI4010-B1-GT
• Description: IC TX 27-960MHZ FSK 3.6V 10MSOP
• Manufacturer: Silicon Laboratories Inc
• Series: EZRadio®r
• Type: ISM Transmitterr

Specifications of SI4010-B1-GT

• Package / Case: 10-MSOP, Micro10™, 10-uMAX, 10-uSOP
• Frequency: 27MHz ~ 960MHz
• Applications: Garage Openers, RKE, Security Alarms
• Modulation Or Protocol: FSK, OOK
• Data Rate - Maximum: 100 kBaud
• Power - Output: 10dBm
• Current - Transmitting: 19.8mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Memory Size: 4kB RAM
• Features: 8051 MCU Core, Crystal-less Operation
• Voltage - Supply: 1.8 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Operating Frequency: 27 MHz to 960 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Operating Supply Voltage: 1.8 V to 3.6 V
• Supply Current: 10 mA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 336-1973-5

Si4010
SFR Definition 29.1. P0
SFR Address = 0x80
122
Name
Reset
7:0
Bit
Type
Bit
P0[7:0]
Name
R/W
7
1
Port 0 Register, GPIO[7:0], Bit Addressable.
Write appears at the GPIO[7:0] outputs, read reads directly the GPIO input values.
Write:
0 .. output low value
1 .. output open-drain or high drive value in push-pull mode
Read:
0 .. GPIO pin is at logic low value
1 .. GPIO pin is at logic high value
Special pins:
The GPIO[0] is input only. Write to GPIO[0] has no effect. The GPIO[5] is output LED
driver only and requires setting of the proper LED drive current. Then GPIO[5] just
turns the LED current on (1) or off (0). Reading from GPIO[5] returns the user
intended driver of LED (1 .. driving, 0 .. off). The read value will be read as 0 if, for
example, the user writes GPIO[5] as 1, but the LED current value
PORT_CTRL.PORT_LED will be 0.
The read GPIO[5] value does not represent the actual driving status of the LED drive,
since the debug logic and C2 can disable the LED. The actual LED driving status can
be read as RBIT_DATA.GPIO_LED_DRIVE bit.
R/W
6
1
R/W
5
0
R/W
Rev. 0.5
4
1
P0[7:0]
Function
R/W
3
1
R/W
2
1
R/W
1
1
R/W
0
1