PIC18F45K80-I/PT Microchip Technology, PIC18F45K80-I/PT Datasheet - Page 224

• Manufacturer Part Number: PIC18F45K80-I/PT
• Description: MCU PIC 32KB FLASH 44TQFP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F45K80-I/PT

• Core Size: 8-Bit
• Program Memory Size: 32KB (16K x 16)
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Core Processor: PIC
• Speed: 64MHz
• Connectivity: ECAN, I²C, LIN, SPI, UART/USART
• Number Of I /o: 35
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 3.6K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 11x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 44-TQFP
• Controller Family/series: PIC18
• Ram Memory Size: 4KB
• Cpu Speed: 16MIPS
• No. Of Pwm Channels: 5
• Embedded Interface Type: I2C, SPI, USART
• Processor Series: PIC18F45K80
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1 KB
• Interface Type: I2C, SPI, USART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 35
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

PIC18F66K80 FAMILY
14.8.3
When Timer1 Gate Toggle mode is enabled, it is
possible to measure the full cycle length of a Timer1
gate signal, as opposed to the duration of a single level
pulse.
The Timer1 gate source is routed through a flip-flop that
changes state on every incrementing edge of the
signal. (For timing details, see
FIGURE 14-5:
DS39977C-page 224
TMR1GE
T1GPOL
T1GVAL
T1G_IN
T1GTM
Timer1
T1CKI
TIMER1 GATE TOGGLE MODE
N
TIMER1 GATE TOGGLE MODE
Figure
14-5.)
N + 1 N + 2 N + 3
Preliminary
The T1GVAL bit (T1GCON<2>) indicates when the
Toggled mode is active and the timer is counting.
The Timer1 Gate Toggle mode is enabled by setting the
T1GTM bit (T1GCON<5>). When T1GTM is cleared,
the flip-flop is cleared and held clear. This is necessary
in order to control which edge is measured.
N + 4
N + 5 N + 6 N + 7
 2011 Microchip Technology Inc.
N + 8