STM32W108B-SK STMicroelectronics, STM32W108B-SK Datasheet - Page 149

• Manufacturer Part Number: STM32W108B-SK
• Description: STARTER KIT FOR STM32W108
• Manufacturer: STMicroelectronics
• Series: STM32r
• Type: MCUr

Specifications of STM32W108B-SK

• Featured Product: STM32 Cortex-M3 Companion Products
• Contents: Board
• Silicon Manufacturer: ST Micro
• Core Architecture: ARM
• Core Sub-architecture: Cortex - M3
• Silicon Core Number: STM32
• Silicon Family Name: STM32W108xx
• Kit Contents: Board
• Features: IEEE
• Mfg Application Notes: STM32W108 Adjacent Channel Rejection Measurements
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: *
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

STM32W108CB, STM32W108HB
Bits [15:12] TIM_IC4F: Input Capture 1 Filter. (Applies only if TIM_CC4S > 0)
Bits [11:10] TIM_IC4PSC: Input Capture 1 Prescaler. (Applies only if TIM_CC4S > 0)
Bits [9:8] TIM_CC4S: Capture / Compare 1 Selection
Bits [6:4] TIM_OC3M: Output Compare 1 Mode. (Applies only if TIM_CC3S = 0)
Bits [7:4] TIM_IC3F: Input Capture 1 Filter. (Applies only if TIM_CC3S > 0)
Bits [3:2] TIM_IC3PSC: Input Capture 1 Prescaler. (Applies only if TIM_CC3S > 0)
Bit 3 TIM_OC3BE: Output Compare 3 Buffer Enable. (Applies only if TIM_CC3S = 0)
Bit 2 TIM_OC3FE: Output Compare 3 Fast Enable. (Applies only if TIM_CC3S = 0)
This defines the frequency used to sample the TI4 input, f
filter applied to TI4. The digital filter requires N consecutive samples in the same state before
being output.
0000: f
0001: f
0010: f
0011: f
0100: f
0101: f
0110: f
0111: f
Note: PCLK is 12 MHz when using the 24 MHz crystal oscillator, and 6 MHz using the 12 MHz
00: No prescaling, capture each time an edge is detected on the capture input.
01: Capture once every 2 events.
10: Capture once every 4 events.
11: Capture once every 6 events.
This configures the channel as an output or an input. If an input, it selects the input source.
00: Channel is an output.
01: Channel is an input and is mapped to TI4.
10: Channel is an input and is mapped to TI3.
11: Channel is an input and is mapped to TRGI. This mode requires an internal trigger input
selected by the TIM_TS bit in the TIMx_SMCR register.
Note: TIM_CC2S may be written only when the channel is off (TIM_CC2E = 0 in the
See TIM_OC4M description above.
See TIM_OC4BE description above.
See TIM_OC4FE description above.
See TIM_IC4F description above.
See TIM_IC4PSC description above.
Sampling
Sampling
Sampling
Sampling
Sampling
Sampling
Sampling
Sampling
RC oscillator.
TIMx_CCER register).
= PCLK, no filtering.
= PCLK, N=2.
= PCLK, N=4.
= PCLK, N=8.
= PCLK/2, N=6.
= PCLK/2, N=8.
= PCLK/4, N=6.
= PCLK/4, N=8.
Doc ID 16252 Rev 8
1000: f
1001: f
1010: f
1011: f
1100: f
1101: f
1110: f
1111: f
Sampling
Sampling
Sampling
Sampling
Sampling
Sampling
Sampling
Sampling
Sampling
= PCLK/8, N=6.
= PCLK/8, N=8.
= PCLK/16, N=5.
= PCLK/16, N=6.
= PCLK/16, N=8.
= PCLK/32, N=5.
= PCLK/32, N=6.
= PCLK/32, N=8.
, and the length of the digital
General-purpose timers
149/209