LM93CIMT National Semiconductor, LM93CIMT Datasheet - Page 33

• Manufacturer Part Number: LM93CIMT
• Description: Microprocessor Support IC
• Manufacturer: National Semiconductor

Specifications of LM93CIMT

• Peak Reflow Compatible (260 C): No
• Supply Voltage Max: 3.6V
• Leaded Process Compatible: No
• Supply Voltage Min: 3V
• Operating Temperature Min: 0��C
• Package / Case: 56-TSSOP
• Operating Temperature Max: 85°C
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

15.0 Using The LM93
15.11 XOR TREE TEST
An XOR tree is provided in the LM93 for Automated Test
Equipment (ATE) board level connectivity testing. This al-
lows the functionality of all digital inputs to be tested in a
simple manner and any pins that are non-functional or
Since the test mode is XOR tree, the order of the signals in
the tree is not important. SMBDAT and SMBCLK should not
be included in the test tree.
To properly implement the XOR TREE test on the PCB, no
pins listed in the tree should be connected directly to power
or ground. If a pin needs to be configured as a permanent
low, such as an address, it should be connected to ground
through a low value resister such as 10 kΩ, to allow the ATE
(Automatic Test Equipment) to drive it high.
The following signals are included in the XOR test tree:
Px_VIDy
GPIO_x
Example of XOR Test Tree (not showing all signals)
PWMx
(Continued)
Px_PROCHOT
33
shorted together to be identified. When the test mode is
enabled by setting the ‘XEN’ bit in the XOR Test register, the
part enters XOR test mode.
When generating test waveforms, a typical propagation de-
lay of 500 ns through the XOR tree should be allowed for.
VRDx_HOT
SCSI_TERMx
RESET
www.national.com
20068219