PIC18F1230-I/SS Microchip Technology, PIC18F1230-I/SS Datasheet - Page 169

• Manufacturer Part Number: PIC18F1230-I/SS
• Description: Microcontroller
• Manufacturer: Microchip Technology
• Series: PIC® 18Fr

Specifications of PIC18F1230-I/SS

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 40MHz
• Connectivity: UART/USART
• Peripherals: Brown-out Detect/Reset, LVD, POR, PWM, WDT
• Number Of I /o: 16
• Program Memory Size: 4KB (2K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 128 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 4.2 V ~ 5.5 V
• Data Converters: A/D 4x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 20-SSOP
• Package: 20SSOP
• Device Core: PIC
• Family Name: PIC18
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 5 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 16
• Interface Type: USART
• On-chip Adc: 4-chx10-bit
• Number Of Timers: 2
• Processor Series: PIC18F
• Core: PIC
• Data Ram Size: 256 B
• Maximum Clock Frequency: 40 MHz
• Maximum Operating Temperature: + 85 C
• Mounting Style: SMD/SMT
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DV164136
• Minimum Operating Temperature: - 40 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164307 - MODULE SKT FOR PM3 28SSOP
• Lead Free Status / Rohs Status: Details

16.0
The Analog-to-Digital (A/D) Converter module has
4 inputs for the 18/20/28-pin devices. This module
allows conversion of an analog input signal to a
corresponding 10-bit digital number in PIC18F1230/
1330 devices.
The module has five registers:
• A/D Result Register High Byte (ADRESH)
• A/D Result Register Low Byte (ADRESL)
• A/D Control Register 0 (ADCON0)
• A/D Control Register 1 (ADCON1)
• A/D Control Register 2 (ADCON2)
REGISTER 16-1:
 2009 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 7
bit 6-4
bit 3-2
bit 1
bit 0
SEVTEN
R/W-0
10-BIT ANALOG-TO-DIGITAL
CONVERTER (A/D) MODULE
SEVTEN: Special Event Trigger Enable bit
1 = Special Event Trigger from Power Control PWM module is enabled
0 = Special Event Trigger from Power Control PWM module is disabled (default)
Unimplemented: Read as ‘0’
CHS1:CHS0: Analog Channel Select bits
00 = Channel 0 (AN0)
01 = Channel 1 (AN1)
10 = Channel 2 (AN2)
11 = Channel 3 (AN3)
GO/DONE: A/D Conversion Status bit
When ADON = 1:
1 = A/D conversion in progress
0 = A/D Idle
ADON: A/D On bit
1 = A/D Converter module is enabled
0 = A/D Converter module is disabled
U-0
—
ADCON0: A/D CONTROL REGISTER 0
W = Writable bit
‘1’ = Bit is set
U-0
—
U-0
—
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
CHS1
The ADCON0 register, shown in Register 16-1,
controls the operation of the A/D module. The
ADCON1 register, shown in Register 16-2, configures
the functions of the port pins. The ADCON2 register,
shown in Register 16-3, configures the A/D clock
source, programmed acquisition time and justification.
PIC18F1230/1330
R/W-0
CHS0
x = Bit is unknown
GO/DONE
R/W-0
DS39758D-page 169
R/W-0
ADON
bit 0