P9PDNVL GE, P9PDNVL Datasheet - Page 55

• Manufacturer Part Number: P9PDNVL
• Description: FULL VOLTAGE
• Manufacturer: GE

Specifications of P9PDNVL

• Screw: INCAND
• Accessory Type: Power Supply
• For Use With: C-2000 Series Contactors & Starters

Guideform Specifications
Description
All contactors shall follow European design conventions and shall
conform to the standards of the International Electro-technical
Commission (IEC), be listed by Underwriters Laboratories (UL)
and be certified by the Canadian Standards Association (CSA).
They shall include:
The devices shall be easily assembled by either the supplier or the
user. They shall be configurable into full-voltage non-reversing
motor starters, full-voltage reversing motor starters, full-voltage
two-speed two-winding motor starters, and wye-delta motor
starters. The accessories shall be easily assembled and shall
include:
All components of the line shall be suitable for low voltage
applications and shall therefore carry a 600V AC rating.
The power components (contactors and overload relays) shall be
tested to UL and CSA standards and carry those listing marks.
They also shall carry the appropriate listing marks showing
compliance with European agency approvals based on IEC
performance standards.
54
A
110(O) 102(E)
140(O) 120(E)
140(O) 120(E)
650(E) 750(O)
Amps at 230V/460V/575V
1. A full line of power contactors (3- and 4-pole)
2. A complete range of current overload relays
3. A full array of auxiliary devices to allow wide control
1. Auxiliary contacts, both normally open and normally closed,
2. Timer, front mountable
3. Mechanical latch attachment, front mountable
4. Mechanical-electrical interlock with two built-in normally
5. Surge suppressor: RC, varistor and diode types
6. Panel mounted overload relay capability
Purpose
General
Ratings
100
150
175
200
310
500
600
functionality
mountable on the front or either side of the contactor
closed contacts for units through 75hp @ 460V
25
25
32
32
54
55
80
104,96,80
22,22,17
34,34,27
Max. FLA
13.8
17.5
140
156
192
302
398
480
602
10
32
48
62
68
80
A
A
A
Note: (O) = Open, (E) = Enclosed
.75 (13.8)
10 (100)
10 (100)
15 (135)
1.5 (20)
7.5 (80)
.5 (9.8)
1 (16)
2 (24)
3 (34)
3 (34)
5 (56)
5 (56)
115V
—
—
—
—
—
1 Phase - Hp (A)
25 (110)
30 (136)
1.5 (10)
7.5 (40)
10 (50)
15 (68)
15 (68)
20 (88)
2 (12)
3 (17)
3 (17)
5 (28)
5 (28)
230V
—
—
—
—
—
50 (149.5)
60 (169.4)
100 (285)
125 (358)
150 (414)
200 (552)
40 (120)
5 (17.5)
5 (17.5)
10 (32)
10 (32)
15 (48)
20 (62)
20 (62)
25 (78)
30 (92)
3 (11)
3 (11)
200V
Auxiliary components, such as auxiliary contacts, also shall carry
all of the above agency approvals and be capable of carrying 10
amperes of AC current at 600 volts in accordance with heavy pilot
industrial duty (A600 rating) or clearly mark any and all
exceptions.
Product
Contactors
Contactors shall function as electrically operated, three phase
(or, in some cases, single phase) power switches that, when
coupled with appropriate overload relays, function as full-
voltage non-reversing motor starters. They shall have the
capability of providing these functions for standard motors
throughout the range of horsepower ratings from 5hp to 500hp
@ 460Vac, three phase. The contactor line shall include 4-pole
contactors in two versions: 4NO from 25A to 650A as a maximum
current rating AC-1, and 2NO-2NC from 7.5hp to 50hp @ 460V.
The contactors shall provide a suitable method by which the user
can connect power wires to both sides of the contactor. In the
smaller sizes (5hp-75hp @ 460V), the wiring shall be fully inserted
into a box lug (screw or terminal) and, in the larger sizes (100hp-
500hp @ 460V), a bus bar shall be provided. It shall be possible
to attach a separate lug as an accessory to the bus bar for ease of
wiring if desired. The power terminals in the smaller frame sizes
of contactor shall be recessed within the frame of the device, as
shall the wire lugs, to provide finger and back-of-hand protection.
The power line and load lug connection of the power devices
shall be labeled and identified with both U.S. terminology (i.e.,
L1, L2, L3, T1, T2, T3) and European terminology (i.e.,
1,3,5,2,4,6). These markings shall be large and easy to read.
Electrical operation of the power contactor shall occur when a
single phase control power voltage is applied across a wide
horsepower/kilowatt range. Horsepower/ kilowatt ratings are
shown below:
100 (248)
150 (360)
200 (480)
250 (602)
40 (104)
50 (130)
60 (145)
75 (192)
5 (15.2)
7.5 (22)
10 (28)
10 (28)
15 (42)
20 (54)
25 (68)
30 (80)
3 (9.6)
3 (9.6)
230V
3 Phase - Hp (A)
100 (124)
125 (156)
150 (180)
250 (302)
300 (361)
400 (477)
500 (590)
7.5 (11)
10 (14)
15 (21)
20 (27)
25 (34)
30 (40)
40 (52)
50 (65)
60 (77)
75 (96)
5 (7.6)
460V
125 (125)
125 (125)
150 (144)
300 (289)
400 (382)
500 (472)
600 (574)
10 (11)
15 (17)
15 (17)
25 (27)
25 (27)
40 (41)
50 (52)
60 (62)
75 (77)
75 (77)
7.5 (9)
575V
132 (250)
160 (310)
220 (420)
280 (550)
375 (700)
18.5 (40)
380/400V
55 (105)
75 (154)
90 (185)
5.5 (12)
7.5 (18)
Power In
11 (25)
16 (32)
22 (50)
30 (65)
37 (80)
45 (95)
kW (A)
4 (9)