C500CP131 Omron, C500CP131 Datasheet - Page 130

• Manufacturer Part Number: C500CP131
• Description: C-SERIES SPECIAL I/O UNIT
• Manufacturer: Omron

Specifications of C500CP131

• Leaded Process Compatible: No
• Peak Reflow Compatible (260 C): No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Printing
Retrieve Part
3-13 Printing
124
1, 2, 3...
1, 2, 3...
1, 2, 3...
The Retrieve part operation can retrieve only files saved with the Save part oper-
ation. The destination address input area will be displayed when “T:Retrieve
part” is selected.
The following operations can be used to print ladder diagrams and mnemonic
lists. Before printing programs, connect and turn on the printer to enable print-
ing.
or
or
1. Enter the file name and press the Enter Key.
2. Enter the file name as up to 8 upper-case or lower-case characters. Drive A
3. Press the Enter Key to retrieve the program.
1. Set the destination address and press the Enter Key. Press the PgDn and
2. Enter the file name and press the Enter Key. Drive A is set default. To change
3. Press the Enter Key to retrieve the program.
1. Press the End Key or Ctrl+M Keys to access the main programming menu.
2. Select “P:Print” from the menu.
is set default. To change the default setting, refer to 6-2-5 Changing the
Drive and Path Name .
Press the End Key or Ctrl+M Keys to display the file name table, select the
required file name with the cursor, and press the Enter Key to input the file
name.
The message Retrieve All will flash on the screen. The programming screen
will be displayed after the program has been retrieved.
PgUp Keys to display the required instruction block, then press the Up and
Down keys to move the cursor to the required address, and press the Enter
Key.
The search operations can be used to find the instruction block or the ad-
dress.
To specify the destination address at the end of the program, display the last
instruction block, press the PgDn Key so that a message at the top-left of the
screen indicates that the final page is displayed, then press the Enter Key.
After the destination address is set, the file name input area is displayed.
the default setting, refer to 6-2-5 Changing the Drive and Path Name .
Press the End Key or Ctrl+M Keys to display the file name table, select the
required file name with the cursor, and press the Enter Key to input the file
name.
The message Retrieve Part will flash on the screen. The programming
screen will be displayed after the program has been retrieved.
Section 3-13