ADNS-9500 Avago Technologies US Inc., ADNS-9500 Datasheet - Page 5

• Manufacturer Part Number: ADNS-9500
• Description: Ultimate Gaming Laser Sensor
• Manufacturer: Avago Technologies US Inc.

Specifications of ADNS-9500

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Figure 4. Isometric drawing of ADNS-9500 sensor and ADNS-6190-002 lens
Figure 5. Recommended PCB mechanical cutouts and spacing
Assembly Recommendation
1. Insert the COB sensor and all other electrical compo-
2. Wave-solder the entire assembly in a no-wash soldering
3. Place the lens onto the base plate. Care must be taken
4. Remove the protective kapton tapes from the optical
5
nents into the application PCB.
process utilizing a solder fixture. The solder fixture is
needed to protect the sensor during the solder process.
The fixture should be designed to expose the sensor
leads to solder while shielding the optical aperture
from direct solder contact.
to avoid contamination on the optical surfaces.
aperture of the sensor and VCSEL respectively. Care
must be taken to keep contaminants from entering the
aperture.
Optical Center
14 X 1.78
12.96
5.02
10.90
0.50
16 X n0.80
5. Insert the PCB assembly over the lens onto the base
6. Optional: The lens can be permanently locked to the
7. Install the mouse top case. There must be a feature in
6.30
12.60
plate. The sensor package should self-align to the lens.
The optical position reference for the PCB is set by the
base plate and lens. The alignment guide post of the
lens locks the lens and integrated molded lead-frame
DIP sensor together. Note that the PCB motion due to
button presses must be minimized to maintain optical
alignment.
sensor package by melting the lens’ guide posts over
the sensor with heat staking process.
the top case (or other area) to press down onto the
sensor to ensure the sensor and lenses are interlocked
to the correct vertical height.
Pin #1