CRT1-ID16TAH Omron, CRT1-ID16TAH Datasheet - Page 129

• Manufacturer Part Number: CRT1-ID16TAH
• Description: 16 In NPN 3 Tier
• Manufacturer: Omron

Specifications of CRT1-ID16TAH

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

3-6-3
Using OMRON MIL
Cable
Connecting External I/O for Slave Units
Connecting to MIL Connector Terminals
Note
4. Lightly pull the wire to confirm that it is connected properly.
To remove a wire, push in the operation lever, check that the operation lever
has locked, and then pull out the wire. After removing the wire, always return
the operation lever to its normal position.
Use any of the following methods to connect to a MIL connector.
• Use an OMRON MIL Cable.
• Pressure-weld a Flat Cable to a MIL Socket.
• Pressure-weld a loose-wire cable to a MIL connector.
• Connecting Relay Terminals
The MIL Cables for connecting OMRON Relay Terminals are shown in the
following table. Select the appropriate Cable depending on the combina-
tion of Remote I/O Terminals and Relay Terminals that are
used.
Operation lever
(white)
CRT1-@D16ML(-1)
Reset opening
CRT1-@D32ML(-1)
Section 3-6
105