ZMOTIONL100ZCOG Zilog, ZMOTIONL100ZCOG Datasheet - Page 21

• Manufacturer Part Number: ZMOTIONL100ZCOG
• Description: EVALUATION KIT Z8FS040 ZMOTION
• Manufacturer: Zilog
• Series: ZMOTION™r

Specifications of ZMOTIONL100ZCOG

• Sensor Type: Motion, PIR (Pyroelectric Infrared)
• Sensing Range: 5m x 5m, 60 Degree Detection Pattern
• Interface: Serial
• Sensitivity: Adjustable
• Voltage - Supply: 5V
• Embedded: Yes
• Utilized Ic / Part: Z8FS040B
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 269-2511

UM023002-0112
To assemble this flat lens and holder, observe the following brief proce-
dure.
1. Place the lens into the inside of the cap, ensuring that the grooves of
2. Place the cap over the base, ensuring that the top of the lens is toward
3. Place the lens and lens holder assembly onto the ZMOTION Devel-
4. Use the provided ⅜" machine screws (4) with a nut to secure the lens
the lens are facing inward.
the arrow on the base. Use the provided ½" machine screws (2) with a
nut to secure the cap in place.
opment Board with the arrow on the lens holder aligned with the pri-
mary placement arrow on the circuit board, as shown in Figure 10.
The four screw holes in the circuit board should line up with the four
center-mounting holes in the lens holder.
holder in place. See Figure 10.
Figure 9. Flat Lens: AA 0.9 GI T1
ZMOTION™ Detection and Control Development Kit
Assembling the Flat Lens Holder
User Manual
17