MTCBA-H4-EN2-GP-P2 Multi-Tech Systems, MTCBA-H4-EN2-GP-P2 Datasheet - Page 51

• Manufacturer Part Number: MTCBA-H4-EN2-GP-P2
• Description: ROUTER WIRELESS QUAD HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-H4-EN2-GP-P2

• Function: Transceiver, HSPA, Router
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz, 1575.42MHz
• Applications: AT&T Networks (USA)
• Interface: RJ-45, RS-232
• Sensitivity: -161dB
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1090

High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
+ICF DTE-DCE Character Framing
Description:
Syntax:
Values:
Parameter Storage:
Examples:
Notes:
This command determines the local serial port start-stop (asynchronous) character framing
used by the DCE.
<parity>
All framing settings of the serial interface (i.e., 801, 8E1, 8S1, 8N1, 7N1, 7O1, 7E1, 7S1 and
7N2) are supported for autobaud mode.
<format>
Command
Action Command:
AT+ICF=<format>[,<parity>]
Read Command:
AT+ICF?
Test Command:
AT+ICF=?
Command
AT+ICF=?
AT+ICF=2,0 OK
AT+ICF?
If USB port is used:
•
•
Character Framing Format
1
2
3
4
5
6
Character Framing Parity
0
1
2
3
4
The <format> and <parity> parameters are stored in EEPROM using AT&W
command. The default value can be restored using AT&F.
The action command is supported for compatibility reasons (but without effect).
The response to the action command and the read command behavior is the
same as if sent on UART1 or UART2.
+ICF: (1-6),(0-4)
OK
Note: New values
+ICF: 2,0
OK
Note: Current values
8 Data 2 Stop
<parity> parameter is ignored
8 Data 1 Parity 1 Stop
If no <parity> provided, 3 is used by default as <parity> value
8 Data 1 Stop
<parity> parameter is ignored. Default.
7 Data 2 Stop
<parity> parameter is ignored
7 Data 1 Parity 1 Stop
If no <parity> provided, 3 is used by default as <parity> value
7 Data 1 Stop
<parity> parameter is ignored
Odd
Even
Mark
Space
None. Default.
Responses
Note: Possible values
Responses
OK
AT+ICF: <format>,<parity>
OK
AT+ICF: (list of supported <format>s),
(list of supported <parity>s)
OK
Chapter 3 – Supported GSM/WCDMA AT Commands
51