MTCBA-H4-EN2-GP-P2 Multi-Tech Systems, MTCBA-H4-EN2-GP-P2 Datasheet - Page 87

• Manufacturer Part Number: MTCBA-H4-EN2-GP-P2
• Description: ROUTER WIRELESS QUAD HSPA
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-H4-EN2-GP-P2

• Function: Transceiver, HSPA, Router
• Modulation Or Protocol: GPRS, GSM, EDGE
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz, 1575.42MHz
• Applications: AT&T Networks (USA)
• Interface: RJ-45, RS-232
• Sensitivity: -161dB
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1090

+CGACT PDP Context Activate or Deactivate
High Speed HSPA-H4 AT Commands Reference Guide (Document S000483A)
Parameter Storage:
Examples:
Description:
Syntax:
Values:
Parameter Storage: None
Examples:
This command activates or deactivates the specified PDP context(s). After the command is
completed, the modem remains in V.25ter command state. If any PDP context is already in
the requested state, the state for that context remains unchanged.
<state> State of PDP Context Activation
<cid>
Command
Action Command:
AT+CGACT=<state>[,<cid>[,<cid>[,…]]]
Read Command:
AT+CGACT?
Test Command:
AT+CGACT=?
Command
AT+CFUN=?
AT+CFUN?
Note: Ask for current functionality level
AT+CFUN=0
Note: Set minimum functionality, IMSI detach
procedure
AT+CFUN=1,0
Note: Set the full functionality mode with a
complete software reset
AT+CFUN=1,0
AT+CFUN=1
Note: Set the full functionality mode with a
complete software reset
AT+CGDCONT=1,"IP","APN"
AT+CGACT=1,1
AT+CGACT?
AT+CGACT=?
AT+CGACT=0
Note: Deactivate all contexts
AT+CGACT=1
Note: Activate first possible context
Command
0
1
PDP Context Identifier
Range: 1-4
Integer type
None
Deactivated
Activated
Chapter 3 – Supported GSM/WCDMA AT Commands
+CGACT: 1,1
OK
OK
OK
OK
Responses
OK
OK
+CGACT: (0-1)
Responses
OK
+CGACT: <cid>,<state>
[+CGACT: <cid>,<state>[…]]
OK
+CGACT: (list of supported <state>s)
OK
Responses
+CFUN: (0,1) , (0,1)
OK
+CFUN: 1
OK
Note: Full functionality
OK
OK
+CME ERROR: 3
Note: No Power Off done before
(CFUN=0, CFUN=4 or CPOF)
OK
87