66102 EATON POWERWARE/MGE OFFICE PROTECTION, 66102 Datasheet - Page 16

• Manufacturer Part Number: 66102
• Description: Network Management Card
• Manufacturer: EATON POWERWARE/MGE OFFICE PROTECTION

Specifications of 66102

• For Use With: Central UPS Systems That Protect A Complete Network Or For UPS Systems Providing Back-up For Critical Equipment

"Communication": indicates the status of the communication between the card and the UPS
"Power source": indicates whether the power comes from the utility or from the UPS battery
"Batteries": indicates whether the battery is being charged, discharged, or is faulty
"Output load level": indicates the power percentage used at UPS output
"Master output": indicates if the UPS output is protected
"Controlled outlets": indicates if the controlled outlets (if available) are powered.
4.2.1.3 "Battery status" zone
The "About your UPS" zone provides information on the UPS and the card, in particular, the model range and software version.
T H E
Network Management Card – User Manual
"Bargraph": graph showing the remaining battery charge (in percent)
"Battery charge level": remaining battery charge (in percent)
"Remaining backup time": Estimation of the battery's maximum backup time remaining before UPS shutdown
"Last periodic test": Result of the last automatic battery test carried out by the UPS
Possible values are:
- OK: the test was completed correctly
– NOK: the battery needs to be checked
– Deactivated: the automatic battery test is not validated on the UPS
•
•
•
•
•
•
U N I N T E R R U P T I B L E
(green outlet)
(red outlet)
•
•
•
•
•
•
Utility power present
Battery operation
Loss of communication with the UPS
Battery fault
Outlet powered
Outlet not powered or not protected
P O W E R
34003991EN/GA
P R O V I D E R
- 16 -