66102 EATON POWERWARE/MGE OFFICE PROTECTION, 66102 Datasheet - Page 42

• Manufacturer Part Number: 66102
• Description: Network Management Card
• Manufacturer: EATON POWERWARE/MGE OFFICE PROTECTION

Specifications of 66102

• For Use With: Central UPS Systems That Protect A Complete Network Or For UPS Systems Providing Back-up For Critical Equipment

4.5.2 Environment Status
For both measurements, a graduated gauge proposes the following functions:
The cursor indicates the current value.
Two red zones to the left and right represent the high and low thresholds that can be set on the Environment Settings page.
When the measured value enters one of these zones, an alarm can be notified (see Notification parameter in the Environment Settings
page).
Time-stamped minimum and maximum temperatures show the extreme values recorded since the last Reset Min/Max, a thin dotted line
shows their positions on the gauge.
Min and Max can be forced at any time to the current value by clicking on the Reset Min/Max button.
Calibrate: The sensor is factory-calibrated, but the user can apply an offset to adjust the measurement.
Input #1 and Input #2 show the position of the two contacts acquired by the sensor.
The position is displayed with the parameters entered in the Environment Settings page.
The last status change of each contact is time-stamped.
The Internet browser updates this page every 10 seconds
T H E
U N I N T E R R U P T I B L E
P O W E R
P R O V I D E R
Network Management Card – User Manual
34003991EN/GA
- 42 -