9015 JEWELL / MODUTEC, 9015 Datasheet - Page 24

• Manufacturer Part Number: 9015
• Description: MULTIMETER DIGITAL HANDHELD, 3-1/2 DIGIT
• Manufacturer: JEWELL / MODUTEC

Specifications of 9015

• Dmm Type: Handheld
• Voltage Measuring Range Dc: 1000
• Voltage Measuring Range Ac: 750
• Current Measuring Range Dc: 2mA To 10A
• Current Measuring Range Ac: 20mA To 10A
• Lead Free Status / RoHS Status: na

9: MAINTENANCE
Your Triplett Model 9015-A DMM is a precision measuring instrument and, when
used as described in this manual, should not require maintenance.
However, periodic calibration of the meter will insure that it is accurate and per-
forming in accordance with its design specifications. A one year calibration inter-
val is suggested.
To clean the outside of the meter, use a cloth dampened with a mild detergent
solution. Do not use any abrasive cleansers, or chemical solvents that may dam-
age the case of the meter.
Be sure to include a full description of the problem, and a telephone number,
street address, or email address, where you can be contacted, and a return ad-
dress where the meter can be shipped to upon repair.
9.1 Replacing Battery:
9.1.1 Remove the test leads and the holster from the meter.
9.1.2 Remove the 3 screws from the back of the meter case.
9.1.3 Open the meter case by separating the front and back case shells at the
TRIPLETT PRODUCT RETURN INSTRUCTIONS
In the unlikely event that you must return your Triplett equipment for repair,
the following steps must be taken.
1) Call 1-800-TRIPLETT to obtain a Return Material
2) Enclose a copy of the original sales receipt showing date of purchase.
3) Clearly print the RMA number on the outside of the shipping container.
4) Return to:
Authorization (RMA) number from Customer Service.
bottom of the meter. Gently pull the case apart, and set the back of the
case to one side.
Triplett Corporation
One Triplett Drive
Bluffton, OH 45817
ATTN: Repair Dept.
23