9015 JEWELL / MODUTEC, 9015 Datasheet - Page 25

• Manufacturer Part Number: 9015
• Description: MULTIMETER DIGITAL HANDHELD, 3-1/2 DIGIT
• Manufacturer: JEWELL / MODUTEC

Specifications of 9015

• Dmm Type: Handheld
• Voltage Measuring Range Dc: 1000
• Voltage Measuring Range Ac: 750
• Current Measuring Range Dc: 2mA To 10A
• Current Measuring Range Ac: 20mA To 10A
• Lead Free Status / RoHS Status: na

9.1.4 Remove the 9 volt battery and replace with a fresh battery (PN 37-48).
9.1.5 Carefully install the fresh battery back into the meter, making sure that
9.1.6 Reassemble case of meter. Reinstall screws.
9.1.7 Verify that the meter operates properly before using it to make
9.2 Replacing Fuse:
9.2.1 Remove the test leads and the holster from the meter.
9.2.2 Remove the 3 screws from the back of the meter case.
9.2.3 Open the meter case by separating the front and back case shells at the
9.2.4 Locate the defective fuse and replace with the exact or equivalent type.
9.2.5 Reassemble case of meter. Reinstall screws.
9.2.6 Verify that the meter operates properly before using it to make
the battery wires will not be pinched when the case of the meter is
reassembled.
measurements.
bottom of the meter. Gently pull the case apart, and set the back of the
case to one side.
See meter specifications.
measurements.
24