85134F AGILENT TECHNOLOGIES, 85134F Datasheet - Page 35

• Manufacturer Part Number: 85134F
• Description: Cable Sets
• Manufacturer: AGILENT TECHNOLOGIES

Specifications of 85134F

• Kit Contents: 2 Cables
• Peak Reflow Compatible (260 C): No
• Cable Length: 24.75"
• Leaded Process Compatible: No
• Connector Type B: 3.5mm Female
• Connector Type A: 2.4mm Female
• Lead Length: 62.9cm
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Returning a Cable or Cable Set to Agilent
If your cable set requires service, contact Agilent Technologies (see below). Include the
following information:
• your company name and address
• a technical contact person within your company, and the person's complete phone
• the model number and serial number of the cable set
• the part number and serial number of each device
• the type of service required
• a detailed description of the problem and how the device was being used when the
Contacting Agilent
Assistance with test and measurement needs and information on finding a local Agilent
office are available on the Web at:
http://www.agilent.com/find/assist
If you do not have access to the Internet, please contact your Agilent field engineer.
NOTE
Information About Network Analyzers
This document contains limited information about network analyzer system operation. For
complete information, refer to the instrument documentation.
85134E/F/H & 85135E/F
number
problem occurred (such as calibration or measurement)
by its model number and full serial number. With this information, the
Agilent representative can determine whether your product is still within its
warranty period.
In any correspondence or telephone conversation, refer to the Agilent product
Returning a Cable or Cable Set to Agilent
Replaceable Parts
4-3