PIC18F86K90-I/PT Microchip Technology, PIC18F86K90-I/PT Datasheet - Page 199

• Manufacturer Part Number: PIC18F86K90-I/PT
• Description: 64kB Flash, 4kB RAM, 1kB EE, 16MIPS, NanoWatt XLP, LCD, 5V 80 TQFP 12x12x1mm TRA
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18F86K90-I/PT

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 69
• Program Memory Size: 64KB (32K x 16)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 4K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 24x12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 80-TQFP
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

15.0
The Timer3/5/7 timer/counter modules incorporate
these features:
• Software-selectable operation as a 16-bit timer or
• Readable and writable 8-bit registers (TMRxH
• Selectable clock source (internal or external) with
• Interrupt-on-overflow
• Module Reset on ECCP Special Event Trigger
Timer7 is unimplemented for devices with program
memory of 32 Kbytes (PIC18FX5K90).
 2010 Microchip Technology Inc.
counter
and TMRxL)
device clock or SOSC oscillator internal options
Note: Throughout this section, generic references
TIMER3/5/7 MODULES
are used for register and bit names that are the
same, except for an ‘x’ variable that indicates
the item’s association with the Timer3, Timer5
or Timer7 module. For example, the control
register is named TxCON and refers to
T3CON, T5CON and T7CON.
Preliminary
PIC18F87K90 FAMILY
A simplified block diagram of the Timer3/5/7 module is
shown in Figure 15-1.
The Timer3/5/7 module is controlled through the
TxCON register (Register 15-1). It also selects the
clock source options for the ECCP modules. (For more
information, see Section 19.1.1 “ECCP Module and
Timer Resources”.)
The F
ECCP capture/compare features. If the timer will be
used with the capture or compare features, always
select one of the other timer clocking options.
OSC
clock source should not be used with the
DS39957B-page 199