BOXDP965LTCK Intel, BOXDP965LTCK Datasheet - Page 18

• Manufacturer Part Number: BOXDP965LTCK
• Manufacturer: Intel

Specifications of BOXDP965LTCK

• Lead Free Status / Rohs Status: Compliant

Intel Desktop Board DP965LT Technical Product Specification
1.4
18
The board has four DIMM sockets and support the following memory features:
•
•
•
•
•
•
•
•
NOTE
To be fully compliant with all applicable DDR SDRAM memory specifications, the board
should be populated with DIMMs that support the Serial Presence Detect (SPD) data
structure. This allows the BIOS to read the SPD data and program the chipset to
accurately configure memory settings for optimum performance. If non-SPD memory
is installed, the BIOS will attempt to correctly configure the memory settings, but
performance and reliability may be impacted or the DIMMs may not function under the
determined frequency.
Table 3 lists the supported DIMM configurations.
Table 3. Supported Memory Configurations
DIMM
Type
DDR2 533
DDR2 533
DDR2 533
DDR2 667
DDR2 667
DDR2 667
DDR2 800
DDR2 800
1.8 V (only) DDR2 SDRAM DIMMs with gold-plated contacts
Unbuffered, single-sided or double-sided DIMMs with the following restriction:
Double-sided DIMMS with x16 organization are not supported.
8 GB maximum total system memory using DDR2 667 or DDR2 533 DIMMs;
4 GB maximum total system memory using DDR2 800 DIMMs. Refer to
Section 2.1.1 on page 43 for information on the total amount of addressable
memory.
Minimum total system memory: 128 MB
Non-ECC DIMMs
Serial Presence Detect
DDR2 800, DDR2 667, or DDR2 533 MHz SDRAM DIMMs
DDR2 800 DIMMs with SPD timings of only 5-5-5 or 6-6-6 (tCL-tRCD-tRP)
System Memory
SDRAM
Technology
256 Mbit
512 Mbit
1 Gbit
256 Mbit
512 Mbit
1 Gbit
256 Mbit
512 Mbit
Smallest usable
DIMM (one x16
Single-sided
DIMM)
128 MB
256 MB
512 MB
128 MB
256 MB
512 MB
128 MB
256 MB
Largest usable
DIMM (one x8
Double-sided
DIMM)
512 MB
1 GB
2 GB
512 MB
1 GB
2 GB
512 MB
1 GB
Maximum capacity
with four identical
x8 Double-sided
DIMMs
2 GB
4 GB
8 GB
2 GB
4 GB
8 GB
2 GB
4 GB