BOXDP965LTCK Intel, BOXDP965LTCK Datasheet - Page 41

• Manufacturer Part Number: BOXDP965LTCK
• Manufacturer: Intel

Specifications of BOXDP965LTCK

• Lead Free Status / Rohs Status: Compliant

1.10.2.6
1.10.2.7
1.10.2.8
1.10.2.9
1.10.2.10 +5 V Standby Power Indicator LED
USB bus activity wakes the computer from ACPI S3 state.
NOTE
Wake from USB requires the use of a USB peripheral that supports Wake from USB.
PS/2 device activity wakes the computer from an ACPI S3 state.
When the PME# signal on the PCI bus is asserted, the computer wakes from an ACPI
S3, S4, or S5 state (with Wake on PME enabled in BIOS).
When the WAKE# signal on the PCI Express bus is asserted, the computer wakes from
an ACPI S3, S4, or S5 state.
The +5 V standby power indicator LED shows that power is still present even when the
computer appears to be off. Figure 13 shows the location of the standby power
indicator LED.
CAUTION
If AC power has been switched off and the standby power indicator is still lit,
disconnect the power cord before installing or removing any devices connected to the
board. Failure to do so could damage the board and any attached devices.
Wake from USB
Wake from PS/2 Devices
PME# Signal Wake-up Support
WAKE# Signal Wake-up Support
Figure 13. Location of the Standby Power Indicator LED
OM18345
41