PIC18F46K80-I/ML Microchip Technology Inc., PIC18F46K80-I/ML Datasheet - Page 253

• Manufacturer Part Number: PIC18F46K80-I/ML
• Description: 44 QFN 8X8X0.9MM TUBE, ECAN, 64KB FLASH, 4KB RAM, 16 MIPS, 12-BIT ADC, CTMU
• Manufacturer: Microchip Technology Inc.

Specifications of PIC18F46K80-I/ML

• A/d Inputs: 11-Channel, 12-Bit
• Comparators: 2
• Cpu Speed: 16 MIPS
• Eeprom Memory: 1K Bytes
• Input Output: 35
• Interface: I2C/SPI/UART/USART
• Memory Type: Flash
• Number Of Bits: 8
• Package Type: 44-pin QFN
• Programmable Memory: 64K Bytes
• Ram Size: 3.6K Bytes
• Speed: 64 MHz
• Temperature Range: –40 to 125 °C
• Timers: 2-8-bit, 3-16-bit
• Voltage, Range: 1.8-5.5 V
• Lead Free Status / Rohs Status: RoHS Compliant part Electrostatic Device

EXAMPLE 18-4:
 2011 Microchip Technology Inc.
#include "p18cxxx.h"
#define COUNT 500
#define DELAY for(i=0;i<COUNT;i++)
#define OPENSW 1000
#define TRIP 300
#define HYST 65
#define PRESSED 1
#define UNPRESSED 0
int main(void)
{
}
unsigned int Vread;
unsigned int switchState;
int i;
//assume CTMU and A/D have been setup correctly
//see Example 25-1 for CTMU & A/D setup
setup();
CTMUCONHbits.CTMUEN = 1;
CTMUCONHbits.IDISSEN = 1;
DELAY;
CTMUCONHbits.IDISSEN = 0;
CTMUCONLbits.EDG1STAT = 1;
DELAY;
CTMUCONLbits.EDG1STAT = 0;
PIR1bits.ADIF = 0;
ADCON0bits.GO=1;
while(!PIR1bits.ADIF);
Vread = ADRES;
if(Vread < OPENSW - TRIP)
{
}
else if(Vread > OPENSW - TRIP + HYST)
{
}
switchState = PRESSED;
switchState = UNPRESSED;
ROUTINE FOR CAPACITIVE TOUCH SWITCH
Preliminary
//@ 8MHz = 125uS.
//Un-pressed switch value
//Difference between pressed
//and un-pressed switch
//amount to change
//from pressed to un-pressed
//storage for reading
//Enable the CTMU
//drain charge on the circuit
//wait 125us
//end drain of circuit
//Begin charging the circuit
//using CTMU current source
//wait for 125us
//Stop charging circuit
//make sure A/D Int not set
//and begin A/D conv.
//Wait for A/D convert complete
//Get the value from the A/D
PIC18F66K80 FAMILY
DS39977C-page 253