SU2200RMXLTNET APC, SU2200RMXLTNET Datasheet - Page 17

• Manufacturer Part Number: SU2200RMXLTNET
• Description: UPS - Uninterruptible Power Supplies APC Smart-UPS XL 2200VA RM 5U 208V
• Manufacturer: APC

Specifications of SU2200RMXLTNET

• Power Rating: 1600 W
• Output Voltage Rating: 208 V
• Number Of Outlets: 5
• Interface Port: DB-9 RS-232, SmartSlot
• Runtime (full Load): 10 min
• Runtime (half Load): 34 min
• Topology: Online
• Tower / Rackmount: Rackmount
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

2. Remove approximately 5 inches of outer jacket from the end of the
3. Refer to Figure 5-5. Connect the input wiring as shown. Secure the
Connect Output Wiring to the Wire Harness Assembly
1. Locate the output panel from the hardwire kit (Figure 3-1, item
input cable. Separate the three wires (white, black and green). Strip
the insulation from the end of each wire so that approximately
3/8" of bare wire is exposed. Route the input wiring through the
input panel so that the panel can be installed correctly after the
connections have been made. Make sure the cable clamp is in-
stalled such that the screws will be located outside of the unit.
ground wire (green) to the primary ground connection with a
green ground screw from the hardware bag.
#1) and remove the appropriate size knockout from the panel. In-
stall a cable clamp so that it can be tightened from the outside of
the unit once the panel is installed.
15