SU2200RMXLTNET APC, SU2200RMXLTNET Datasheet - Page 39

• Manufacturer Part Number: SU2200RMXLTNET
• Description: UPS - Uninterruptible Power Supplies APC Smart-UPS XL 2200VA RM 5U 208V
• Manufacturer: APC

Specifications of SU2200RMXLTNET

• Power Rating: 1600 W
• Output Voltage Rating: 208 V
• Number Of Outlets: 5
• Interface Port: DB-9 RS-232, SmartSlot
• Runtime (full Load): 10 min
• Runtime (half Load): 34 min
• Topology: Online
• Tower / Rackmount: Rackmount
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5.4 Installing the Hardwire Kit on 208V Rack Mount
Follow the procedures in this section to install the hardwire kit to a
208V Smart-UPS in the rack mount configuration (Model numbers
SU1400RMXLT and SU2200RMXLT).
5.4.1 Removing the Rear Panels
Remove the Output Panel
1. Unpack and inspect the hardwire kit. Notify the carrier and dealer
2. Prepare the UPS for installation. Shut down any protected loads
3. IMPORTANT: Turn off the UPS and unplug it from the wall out-
4. Unscrew the output panel at the rear of the UPS. Remove only the
5. Pull the panel out gently so that the 3-pin
6. Squeeze the locking tabs on the sides of the connectors and unplug
immediately if there is damage. Recycle the packaging or dispose
of it properly.
(computers, etc.), if present. Unplug all loads from the output re-
ceptacles of the UPS.
let.
4 screws indicated in Figure 5-24.
the connectors from the printed circuit board. Note the location of
the connectors.
Units
in-line connectors are accessible.
, 4-pin
, and 4-pin
37