CS8952-CQ Cirrus Logic Inc, CS8952-CQ Datasheet - Page 41

• Manufacturer Part Number: CS8952-CQ
• Description: IC ETHNT 10/100 TXRX 5V 100-TQFP
• Manufacturer: Cirrus Logic Inc
• Type: Transceiverr

Specifications of CS8952-CQ

• Mounting Type: Surface Mount
• Protocol: MII
• Voltage - Supply: 4.75 V ~ 5.25 V
• Package / Case: 100-TQFP, 100-VQFP
• Peak Reflow Compatible (260 C): No
• Supply Voltage: 5V
• Supply Voltage Max: 5V
• Transceiver Type: Ethernet
• Leaded Process Compatible: No
• No. Of Drivers: 6
• Interface Type: MII
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Number Of Drivers/receivers: -
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant, Contains lead / RoHS non-compliant
• Other names: 598-1205

6.8
CrystalLAN™ 100BASE-X and 10BASE-T Transceiver
15
14
13
12
11
10:0
BIT
Next Page
15
7
Next Page
Acknowledge
Message Page
Acknowledge 2
Toggle
Message/Unformat-
ted Code Field
Auto-Negotiation Next-Page Transmit Register - Address 07h
NAME
Acknowledge Message Page Acknowledge 2
14
6
Read/Write 0
Read Only 0
Read/Write 1
Read/Write 0
Read Only 0
Read/Write 000 0000 0001
TYPE
13
5
Message/Unformatted Code Field
RESET
12
4
When set, this bit indicates that more Next Pages fol-
low. When clear, the current page is the last page of
data to be sent.
Note: This bit is disabled, and writes to this bit are
ignored when the National Compatibility Mode bit of
the 10BASE-T Configuration Register (address 1Ch)
is set.
This bit is used for Link Code Word verification.
When set, it indicates that consistent data has been
successfully read from the link partner.
When set, this bit indicates that the data in the Mes-
sage/Unformatted Code Field is one of the pre-
defined message pages. When low, the data is
unformatted data.
Note: This bit is disabled, and writes to this bit are
ignored when the National Compatibility Mode bit of
the 10BASE-T Configuration Register (address 1Ch)
is set.
When set, this bit indicates to the link partner that the
CS8952 can comply with the last received message.
Note: This bit is disabled, and writes to this bit are
ignored when the National Compatibility Mode bit of
the 10BASE-T Configuration Register (address 1Ch)
is set.
This bit is used to maintain synchronization with the
link partner during Next Page exchange.
This field contains the 11 bit data for the Message or
Unformatted Page. It defaults to the Null Message.
Note: This field is disabled, and writes to this bit are
ignored when the National Compatibility Mode bit of
the 10BASE-T Configuration Register (address 1Ch)
is set.
Toggle
11
3
10
Message/Unformatted Code Field
2
DESCRIPTION
9
1
CS8952
8
0
41