CC-W9M-NA37-XE Digi International, CC-W9M-NA37-XE Datasheet - Page 64

• Manufacturer Part Number: CC-W9M-NA37-XE
• Description: MOD WI-9M 64MB SDRAM 128MB FLASH
• Manufacturer: Digi International
• Series: -r

Specifications of CC-W9M-NA37-XE

• Module/board Type: Core Module
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: Networking

www.digiembedded.com
Peripheral
application
connector
LCD Application
Kit Connector
VGA interface
UARTs
UART A - console
UART B - UART /
MEI
UART C - TTL
interface
UART D - TTL
interface

















The Peripheral application connector supports the JumpStart Application
Modules.
The LCD Application Kit Connector supports the JumpStart LCD modules.
A standard VGA Interface is provided to support an external monitor.
The ConnectCore 9M 2443 development board is supporting the 4 UARTs
available on the ConnectCore 9M 2443 module. Detailed usage, of each UART is
described in the following chapters.
The ConnectCore 9M 2443 UART A signals are used as the standard console.
This UART supports TXD, RXD and CTS#, RTS# handshake lines.
UART A signals are available on RS232 levels. This connector is a DSUB9 male
which will connect to the host via null modem cable.
UART A is providing status LEDs on TXD, RXD, RTS# and CTS# handshake signals.
UART A line drivers can be disabled if required.
The ConnectCore 9M 2443 UART B signals are full-function UART, providing
access to TXD, RXD and CTS#, RTS# handshake signals.
UART B signals are available on RS232 levels. This connector is a DSUB9 male
which will connect to the host via null modem cable.
UART B is providing status LEDs on TXD, RXD, RTS#, CTS#.
UART B is also the interface supporting the Digi MEI interface (RS422/RS485).
UART B line drivers can be disabled if required.
The ConnectCore 9M 2443 UART C signals provide access to TXD, RXD and CTS#,
RTS# (if UART D is not used, else TXD, RXD only).
UART C signals are available on TTL levels. Connector is a 2x5-pin 2.54mm
header compatible with TTL2RS232 adapter (P/N: FS-276).
The ConnectCore 9M 2443 UART D signals provide access to TXD and RXD signals
(if UART C handshake is not used).
UART D signals are available on TTL levels. This connector is a 2x5-pin 2.54mm
header compatible with TTL2RS232 adapter (P/N: FS-276).
64