KIT_TC1797_SK Infineon Technologies, KIT_TC1797_SK Datasheet - Page 13

• Manufacturer Part Number: KIT_TC1797_SK
• Description: KIT STARTER AUDO FUTURE TC1797
• Manufacturer: Infineon Technologies
• Series: Audo Futurer
• Type: MCUr

Specifications of KIT_TC1797_SK

• Contents: Board, Adapters, Cables, CD, Power Supply
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: TC1797
• Other names: KITTC1797SKIN

2
BCU_TC.006 Polarity of Bit SVM in Register ECON
The polarity of bit SVM (State of FPI Bus Supervisor Mode Signal) in the SBCU
Error Control Capture register SBCU_ECON is inverted compared to its
description in the User’s Manual.
Actually, it is implemented as follows:
•
•
BROM_TC.005 Power-on reset (PORST) while no external clock is avail-
able
In case no stable clock is present at the oscillator input pin (XTAL1) after
PORST, the device will wait indefinitely, i.e. it hangs and is not able to execute
application code or enter one of the bootstrap loader modes.
This behavior occurs only after PORST during initialization of the FlexRay
module by the internal Startup Software.
Workaround
Proper device start-up after PORST is only possible if a stable clock signal from
an external crystal, ceramic resonator or an external clock source is to available
at the XTAL1 pin of the device
CPU_TC.105 User / Supervisor mode not staged correctly for Store In-
structions
Bus transactions initiated by TriCore load or store instructions have a number
of associated attributes such as address, data size etc. derived from the load or
store instruction itself. In addition, bus transactions also have an IO privilege
level status flag (User/Supervisor mode) derived from the PSW.IO bit field.
TC1797, EES-AC, ES-AC, AC
SVM = 0
SVM = 1
B
B
: Transfer was initiated in user modes
: Transfer was initiated in supervisor mode
Functional Deviations
13/101
Functional Deviations
Rel. 1.3, 18.12.2009
Errata Sheet