TE28F800F3B95 Intel, TE28F800F3B95 Datasheet - Page 25

• Manufacturer Part Number: TE28F800F3B95
• Manufacturer: Intel

Specifications of TE28F800F3B95

• Cell Type: NOR
• Density: 8Mb
• Access Time (max): 95ns
• Interface Type: Parallel
• Boot Type: Bottom
• Address Bus: 19b
• Operating Supply Voltage (typ): 3/3.3V
• Operating Temp Range: -40C to 85C
• Package Type: TSOP
• Sync/async: Async/Sync
• Operating Temperature Classification: Industrial
• Operating Supply Voltage (min): 2.7V
• Operating Supply Voltage (max): 3.6V
• Word Size: 16b
• Number Of Words: 512K
• Supply Current: 60mA
• Mounting: Surface Mount
• Pin Count: 56
• Lead Free Status / Rohs Status: Not Compliant

4.9.7
4.9.8
PRELIMINARY
Burst Length – (RCR.2—0)
The burst length is the number of words that the device will output. The device supports burst
lengths of four and eight words. In four- or eight-word burst configuration the device will perform
a wrap around type burst access (See
continuous burst mode, the device will linearly output data until the internal burst counter reaches
the end of the device’s burstable address space. Bits RCR.2–0 in the read configuration register set
the burst length.
Continuous Burst Length
When operating in the continuous burst mode, the flash memory may incur an output delay when
the burst sequence crosses the first 16-word boundary. The starting address dictates whether or not
a delay will occur. If the starting address is aligned to a four-word boundary, the delay will not be
seen. If the starting address is the end of a four-word boundary, the output delay will be equal to the
frequency configuration setting; this is the worst case delay. The delay will only take place once
during a continuous burst access, and if the burst sequence never crosses a 16-word boundary, the
delay will never happen. Using the WAIT# output pin in the continuous burst configuration, the
system is informed if this output delay occurs.
Table
8). It also supports a continuous burst mode. In
28F800F3—Automotive
19